Just wondering if I am alone here, I have a B riser that I purchased 2 years ago that has started to separate on the lower socket. The socket is pulling away from the riser. Talked to Bear customer service, warranty is off and it would be $800 to repair! I was very disappointed with the info they gave me and somewhat saddened that they would not stand behind an obvious failure. Anybody have the same story? I did email Bowdoc and he said I was the fourth that he knew of. chickenman
sorry for your loss. I don't know if this helps, but 3 Rivers has new risers for $600.
Joel; I've seen this a couple of times with the use of heavy weight high performance limbs along with fastflite ! (that a few Bowyers are Producing). I had an A Mag handle break with 62# H.P. limbs and NO fastflite . This is why I would prefer to build my own handle. That is very poor service on the part of bear archery!
Joel I'm sorry to hear about your troubles. Don (Bowdoc) and I have talked about this issue in some of the older risers-at least I think we were talking about older risers-but I haven't heard of the problem in newer models. I'm shooting two old wooden B risers, '69 and '71 models and shoot heavier weights on each (65& 69 lbs. respectively) but I'm scared of fast flight for these bows regardless of the limb construction, as Segio implied. I've been shooting these bows a long time with no problems; one for thirty years or so and I shoot a lot. Bowdoc could probably fix this problem but I don't know how long it would stay fixed if you're using high performance,low stretch strings. Did you ask him about working on it? I also agree with Sergio regarding the quality of service from Bear. The "Old Man" wouldn't have liked that. Good luck,
Grant
Try Bowdoc or Droptine
ND... does your handle have one of those little compasses inletted in it? I wondered if drilling that hole for the compass weakens the riser.... just a thought.... When Fred was CEO of Bear Archery issues like this would be taken care of, sadly times are a changin... good luck.
Wow......that is just horrible service from Bear. Very disappointing. Stick with Bow Doc and his advice. He's the real deal and will take care of you. Good luck with it.
Thats why I'll never own a Bear bow.......service has been going downhill for the past few years.
It seems that Bear has just become a company that wants to sell bows using Fred's legacy but doesn't want to honor it's product. All about the money. These takedowns don't have a disposable price on them, but that's what they sold me, a disposable bow. I did rag on the customer service rep but nothing serious, it's not his fault. I am going to hang the bow up, sell the limbs and shoot my Silvertip from here on in. Maybe I can find an old Kodiak from when Bear used to know how to make them. chickenman
That is a pathetic situation with the current owners of the Bear name. No way Martin or the majority of other bowyers in this industry would treat a customer that way. It's just about a crime given what they charge for those bows.
Glad you posted because I WAS considering buying a Grizzly on a whim. :scared:
I'am going to go with Sergio,for a minute here first.Yes I would say to some degree you are correct.Any bow built before the mid 1980's should never be used with FF string.The bow was not designed for FF in the begaining,because there were no FFS then.It was kevlar.And was worse on older bows then FF.Because the kevlar would cut into the tip overlays.It's so fine of strands it would find a way in.Olypic shooters use kevlar and only shoot 300 arrows per string and then it is dicarded as the strands start to break down.FF and kevlar are faster,no dout about that.But there is massive shock to the string apone release of the arrow.Those strings do not stretch,no give to the FF and kev's like a B-50 lets say.For every action,there's a reaction,and the reaction could be your bow breaking...Now the truth,I've seen 4 or 5 new T/D's and have seen oh about 40 or so grainsville bows with cracks.I've been lucky and repaired some,and some are like Joel's,they will never see the flight of an arrow again.Or let me say safly see the fight of an arrow again...What caused the cracks in about 90% of the ones I've seen was not the limbs or FF strings though.But was caused by water or moisture gettting under the sockets and spliting the wood.Any moisture will cause wood to split at some point.The last operation done on Bear T/D risers was the sockets were glued into the riser.The risers were all finished then they glued the sockets in.This was to prevent getting clear finish on the sockets.If there was an air-bubble in the epoxy,that would allow water into the cavity...Hence we got done hunting cleaned and polished our bows up and put her away for next week huh??? Never thought about that one stinking drop of water under the sockets..But it may have been leathal on some T/D's....now that I drug that one out to the limit...If you do use your Bear T/D,and it's wet outside.You can blow under the socket dry with low heat from the hair drier.Please I am not defending Bear Archery in anyway.They should make good on Joel's and everyone else new risers no matter what......That is a defect in matirals...This is the bottom line for me anyhow.You don't stand behind your product.Please don't stand in front of it....bowdoc
Wow what a bummer! The Bear take-down was something I wanted to own eventually. Not now!!
I would like to add one note.Fred spent many years working on his baby.And I still think they are by far the best take down ever built,just because you never needed any tools to assamble it.I always thought that was great.They are really good bows.Just look them over good before you buy one.If it's not cracked by now pretty good chance it will never crack..bowdoc
nd, if I was in your shoes I would try and find someone that would make you a new handle. I have heard of this being done. My handle is 11 years old now. I had an issue with the limbs but the Bear rep got me a new set at no charge. Guess times change for the worst.
Awhile back I saw a cracked handle on that auction site that was bid up $200. That may be a way to go to recoup some of your loses.
Ergo, this is why I was looking for a set of latches, so I can build my own handle with phenolic caps( where the sockets attach) and probably drill,tap and install some brass threaded bushings and screw the socket/latch system into the bushings.Perhaps that is something that Bear should consider.
I just heard today from a guy who ordered a kodiak supreme and when he got it it was 5 pounds heavier than stated and the glass had white dots under it. I guess he was not happy and sent it back.
On bears defense if you were shooting the FF limbs made by Dave I wouldn't warranty it either.
I have 5 bear takedowns, don't shoot FF and have never had a lick of problems!
The problems started after the move to Gainville Fa.(1978).For what ever reason Bear Archery at that point started rolling down hill fast(out of control).The went cheep on us...and the newer T/D's really reflict that...Sad day....bowdoc
You guys are freaking me out as I just bought a Supreme TD!!! I am shooting it w/B 50 and it's an outstanding shooter for me. I'll have to make certain to dry it thoroughly after a rainfall I guess. Is anybody else having issues?
Limbhanger,
Don't get freaked out. Enjoy your bow. I don't have a Supreme TD only because I can't afford one right now (I have 2 teenage daughters) but I have 6 regular Bear t/d's; an A and B mag handle; two wood B handles made in the '80's and an A and a B handle both made in 2001. I shoot them all and have had no problems with any of the handles. My 2001 B handle with 65# FF limbs and FF string is my most main deer killing bow. I've hunted in the rain, cold and heat with that bow and have killed many deer with it. I shoot it at least 4 or 5 days a week launching 15 to 25 arrows each shooting day. On weekends I may shoot at least 30 to 50 arrows, sometimes more.
I did have a problem with one of the limbs. About 4 years ago a set of 65# limbs, green tip, made in the 80's, developed a split. I contacted Bear Archery and sent them the limbs. They sold me a brand new set for 1/2 price. I thought that was decent.
I'm sorry that some of these other guys had bad luck with Bear bows, but for me that's what I shoot. Enjoy your bow!
Murray
Robhood23, I do agree that I do use the riser to the max. I have shot the Schafer limbs using this riser, not alot, but I used them. I shoot 70+ lbs with a 31 1/2 inch draw. I have concluded that I am better of with different kind of set up. I absolutely love the Kodiak TD, I guess I am going through the greiving process facing the fact that it just isn't for me.
Thanks Trooper, that makes me much more
confident. I did look the sockets over carefully
and did find some small voids in the glue joint.
I carefully added some cyanoacrylate with a
pin to fill the voids. That's about the best
I can do to try to prevent water from sneaking
underneath. I love the bow, looks and shootability,
and would hate to lose confidence in her for
fear that I may have a breakdown. Thanks again
for the feedback, it's greatly appreciated!
Joel; just curious as to what arrow weight you were shooting from your Bear Kodiak???
OK, so if a guy got it in his head that he really wanted a B riser with #3 limbs, what should he be looking for in terms of a 'born on date'? Pre '78 only, or figure that if'n it lasted since the early 80's it's probably a good one?
You know, just in case 'a guy' got it in his head :)
Sergio, I shoot 2219,2317 and 2419 out it.
Jeremy I'd look for one with no cracks around the sockets or at the arrow shelf.There's only a small percentage with cracks...But it does happen...bowdoc
Well Joel, your arrows were certainly heavy enough and not the problem.
I'm shocked at that kind of service from Bear. I know it's not the same Bear as years ago, but I had a Super Kodiak that started coming apart after some years. I has modified the shelf to a crown with a file so I figured I was really screwed. I sent the bow to Bear anyway asking if it could be fixed. After a few months I hadn't heard anything at all. Then one day the mail truck pulls up in the driveway with a box from Bear. I knew it was a bow. I opened it and it was a brand new Super Kodiak. There was no letter or explanation just the bow. Now that was customer service!