anyone know what aluminum shafts will fit inside another shaft ? I have never messed with carbon and really dont care to, but the good doctor ashby has me all messed up (with very good info) life was alot simpler before I knew anything about FOC and such things. I killed a BUNCH of critters with my old 2020 and 2216's over the years. BUT since I am at work and thinkin about this instead, has anyone ever did a duplex shaft in the front portion only of a ALUMINUM shaft? I know folks are doing a footing on carbons but I want to try a internal sleeve on a aluminum...
thanks for the help Dave
Subtract 2 times the wall thickness from the shaft diameter to get the inside diameter. Example for a 2216
((22/64)-(2*16/1000))*64 = 19.952
Therefore a 19XX shaft is the largest shaft that will fit into a 2216.
Right here on the Trad Gang is a great chart.
http://www.tradgang.com/stuff_bin/arrowfit1.pdf
Thanks alot guys, I did a search of powow and came up blank. i went to our archery shop at lunch and got a 1916 and a 2219 and a 2216 to play with... 'preciate your help
I only shoot wood, but it ocurrs to me that 6-8 in of aluminum won't have nearly as much effect as 6-8 inches if purple heart or wenge.
Paul Schafers buffalo arrows consited of a 1916 inserted into a 2117.
Mike pm sent