Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: grouse11 on October 12, 2014, 01:45:00 PM

Title: Double threaded inserts from binghams?
Post by: grouse11 on October 12, 2014, 01:45:00 PM

Hi everyone, I have another question, I ordered some double threaded inserts from binghams and am wondering what the dimensions are, they aren't indicated on the website. I have the holes drilled and am ready to tap but I need to know what tap to use. Any help would be greatly appreciated  :)

Thanks,
Mark

Title: Re: Double threaded inserts from binghams?
Post by: BenBow on October 12, 2014, 02:14:00 PM

1/2 NC 13 threads per inch if my memory serves me correctly

Title: Re: Double threaded inserts from binghams?
Post by: Hill Hunter on October 12, 2014, 05:26:00 PM

Yep, just installed some, 1/2 13, drill 27/64

Title: Re: Double threaded inserts from binghams?
Post by: grouse11 on October 12, 2014, 05:33:00 PM

sweet, thanks  :)  I'll get them tapped ahead of time

Title: Re: Double threaded inserts from binghams?
Post by: Bivyhunter on October 14, 2014, 10:29:00 AM

FYI, I've had some issues with some of the Bingham's inserts. Check them with a limb bolt before installing. I've had some of them bind up and had to cut the limb bolt off with a hacksaw to free it from the insert, after I'd glued it into the riser. I haven't had any issues with the the inserts I bought from Dale Stahl (better price too).

Title: Re: Double threaded inserts from binghams?
Post by: grouse11 on October 14, 2014, 11:14:00 AM

Thanks for the info!!! I should have everything when I go home this weekend and will check that out  :)

Title: Re: Double threaded inserts from binghams?
Post by: DoubleLung on October 14, 2014, 05:55:00 PM

Does Dale Stahl have a webpage. I searched but couldn't come up with anything.

Title: Re: Double threaded inserts from binghams?
Post by: Dmaxshawn on October 16, 2014, 07:53:00 AM

http://www.gordoncomposites.com/industries/archery.html


Dale really doesnt have a website to go and click and fill your shopping cart.  Youll have to email him and get his current price sheet.  I would copy and paste mine but his new one might be different.  hope this helps.

Shawn

Title: Re: Double threaded inserts from binghams?
Post by: DoubleLung on October 16, 2014, 05:39:00 PM

I appreciate it Shawn!

Title: Re: Double threaded inserts from binghams?
Post by: Ron Foley on October 16, 2014, 11:20:00 PM

I ALWAYS run a tap thru the insert BEFORE I glue it into the riser. Then thread a limb bolt into it to make sure