Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: NYAntler on September 28, 2014, 05:32:00 PM
-
Hey fellas
Although I am a carpenter by trade and have cabinet making knowledge of finishes and such... I need some help with a self finish "GI Bow" longbow I bought as a project... is it okay to sand sharp edges on limbs and smooth out the wood a bit without weakening the bow? and... for a first time project is a faux cloth snake skin going to give me a realistic snake skin look? I want to keep the cost down... and can I use Tru Oil and still spray on a finish coat of poly at the end or do I even need to for a durable finish?
I plan on hunting with the bow...
-
Rounding the edges on a wooden bow is a must, and I think if it cost you any draw weight it would be negligible. Maybe someone else will weigh in on your other questions 'cuz I got nothing on those.
Good luck on your bow!
-
I turned one of those GI Bows into a 2 piece takedown for my lady-friend's daughter. Certainly round those edges a bit. I wouldn't use anything rougher than 150 grit though.
IMHO cloth snake skin is gonna look like cloth snake skin. If you're set on a snake look use real skins. If you just want something decorative to back the bow with there are lots of alternatives including a wide variety of wide silk ribbons, Sharpie or ink line pattern drawing, etc.
Spray "varnish" over Tru Oil won't go well. Use Tru Oil and wax or a wood stain and Helmsman Spar Varnish.
-
Round the edges for sure. The old timers use to say to the diameter of a pea. I don't go that far but I do round them pretty good. You are basically removing dead weight anyway and it shouldn't affect the draw weight.
For finish I use Tru-Oil on all my bows. For hunting bows I add a quick spray of satin poly to reduce the shine. Generally you should not use a hard finish over a softer finish but in this case it works fine.
-
X 2 re snake skins. I've used couple on bows and not at all impressed with the look.
-
I've used trü oil on all 3 of my guitars as well as my first completed bow. It is quite versatile. You can get that shiny look with enough coats or a dull one. You don't have do put anything over it. Just make sure to use steel wool if you want it nice and smooth.
-
Round the edges for sure. I use Tru Oil on osage and they spray with spar urethane.
It should wok on all woods but testing it on a scrap piece of the same wood as the bow is a good idea.
Jawge