Print Page - Measuring Lams

Title: Measuring Lams
Post by: perry f. on October 26, 2011, 08:07:00 AM

Just wondered what you all used to measure Lams. Wanting to try making my own. Thanks

Title: Re: Measuring Lams
Post by: JJACOBS on October 26, 2011, 10:24:00 AM

I use a dial caliper, take measurements on each end and in the middle. Write them on the lams with a pencil. It will come off with acetone, or u can leave it on, just do not let it show thru your clear glass

Title: Re: Measuring Lams
Post by: JamesV on October 26, 2011, 05:21:00 PM

I also use a dial caliper to mesure my lams.

Title: Re: Measuring Lams
Post by: ryguy24000 on October 26, 2011, 06:56:00 PM

Dial caliper

Title: Re: Measuring Lams
Post by: perry f. on October 26, 2011, 08:19:00 PM

Thanks guys!

Title: Re: Measuring Lams
Post by: eflanders on November 23, 2011, 09:40:00 PM

I am lucky enough to have a digital micrometer and caliper left over from my mechanic days...

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: perry f. on October 26, 2011, 08:07:00 AM