Print Page - Repair Kodiak Magnum ?

Title: Repair Kodiak Magnum ?
Post by: SteveL on February 19, 2008, 04:43:00 PM

I have a green Kodiak Magnum that I think was made in the 70's. Right where the stablizer insert is installed the overlay laminations are cracked just about dead center through the hole. Also the overlays down to the wood level are lifted up about 2" above the insert and about an 1" below the insert. When strung the space between fiberglass and wood becomes noticeably wider. About the thickness of 6-7 pieces of paper.

Everything else is just about perfect on the bow. Is it possible to restore it back to shooting condition? If so what approach/methods do you recommend?

Thanks,
Steve

Title: Re: Repair Kodiak Magnum ?
Post by: 4runr on February 19, 2008, 07:34:00 PM

You should post this in the Tad History forum. Bowdoc and Droptine59 would be more likely to see it.

Title: Re: Repair Kodiak Magnum ?
Post by: SteveL on February 20, 2008, 01:09:00 PM

Thanks Kenny. I'll try over there.

Title: Re: Repair Kodiak Magnum ?
Post by: d. ward on February 20, 2008, 02:20:00 PM

We got him Kenny he reposted it.Richie and I have him more confused then ever now.............bowdoc

Trad Gang

Main Boards => PowWow => Topic started by: SteveL on February 19, 2008, 04:43:00 PM