Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: swamptrecker84 on January 05, 2011, 01:59:00 PM
-
on a laminated bow is tillering still required or do you just cut out the profile of the limbs and riser and your done? This is a bow without glass. Thanx
-
You will have to tiller the bow when done,tapering your lams prior to glue up makes this process easier.
-
do you tiller the bow the same way you would do a board bow with sanding and scrapping?
-
Yes,although When you pre taper lamination's prior to glue up often you just need a little sanding to bring it into tiller.