Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: gudspelr on March 14, 2010, 05:21:00 PM
-
Well, I'm getting ready to build my first bow. It will be a laminated longbow with action wood riser and lams (glass belly and back). I don't want to jinx myself by getting ahead here, but figured I'd get some of your opinions on a finish.
In the hopes that the bow turns out and I don't end up with a knot on my forehead, what would be a good, waterproof (and preferably not too shiny) finish? Also, I do not have a spray gun....
Thanks in advance for your suggestions.
-
A good $10-15 finish that is easy to apply and when your done you'll have enought for a couple more bows: Get a small bottle of Tru-oil $5-6, use your fingers to rub it in the grain and fill in all the pores. After the first coat dries, buff it with 0000 steel wool, and repeat 5-10 times. Once you have a perfectly smooth, glass finish buff it the last time with the wool and apply 2 light coats of Helmanns Spar Urethane (Satin spray can) $6-7. It will look great.
-
Thanks for the reply-I sure appreciate it. Can't beat cheap and minimal equipment for a good finish :) .