Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: longbowray on March 02, 2010, 07:25:00 PM

Title: tip overlay
Post by: longbowray on March 02, 2010, 07:25:00 PM
What glue to use to deer antler tips overlays? thx.ray  :)
Title: Re: tip overlay
Post by: ranger 3 on March 02, 2010, 07:31:00 PM
I always use TB11, but be sure your surfaces match good because it will not fill gaps.
Title: Re: tip overlay
Post by: Roy from Pa on March 02, 2010, 07:32:00 PM
Smooth On
Title: Re: tip overlay
Post by: longbowray on March 02, 2010, 07:40:00 PM
what is smooth on ?
Title: Re: tip overlay
Post by: Mike Most on March 02, 2010, 07:58:00 PM
Smooth on epoxy is the one of the archery industry standards for applying tips and laminating bow limbs together.  Its in the 3R catalog or available at Binghamsprojects.com.

In my humble opinion it is about the only thing which will hold a deer antler tip overlay in place.

Good Luck

Mike
Title: Re: tip overlay
Post by: longbowray on March 02, 2010, 08:18:00 PM
thank you guys look like im ordering some for 3r
Title: Re: tip overlay
Post by: DVSHUNTER on March 02, 2010, 09:23:00 PM
I habe used 5min epoxy and superglue,both worked well
Title: Re: tip overlay
Post by: Pat B on March 02, 2010, 11:01:00 PM
I use gel super glue, TBIII and 2ton epoxy all with good results...on wood bows.
Title: Re: tip overlay
Post by: Roy from Pa on March 03, 2010, 06:25:00 AM
Here ya go for smooth on. It's the best..

 http://www.3riversarchery.com/Glue+Adhesives+Specialty++Smooth-On+EA-40+Bow_c59_s76_p0_i4458_product.html
Text only | Text with Images