This is probably a silly question but what is the best way to cut fiberglass laminations..heavy scissors, razor..the strip is too long for my band saw.
Thanks in advance
Cut or trim? I use a beltsander for trimming width, and a small grinder for cutting.
Hack saw, tin snips, or grinder
Chuck
Yep,hacksaw,glass laid flat on a scrap,or a highspeed cutoff tool with abrasive blade,don't inhale it!
I use a dremel tool with a cut off wheel. I've tried snips before, and it causes the fiberglass to splinter.
we use a all metal fiber blade and made a table saw to take the fiber blades u can buy the blades at Lowels we make all glass E And S glass and carbon and this is what we use a blade will cut about 1000 laminations they will eat up a bandsaw even with a metal blade this works great we told gray wolf and he made one and likes it.