Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: SteveD on July 12, 2009, 07:21:00 AM

Title: First Time with Clear Glass
Post by: SteveD on July 12, 2009, 07:21:00 AM

This is the first time with Clear Glass. I was wondering. Do you sand the entire glass face and belly. Also what grit do you go up too. 400grit?

Title: Re: First Time with Clear Glass
Post by: kennym on July 12, 2009, 09:25:00 AM

If you are talkin for spraying finish,sand to at least 220 for satin . Sand the whole surface. The glass will turn sorta milky colorwhen you sand,but don't worry, it'll go clear as ,well... glass when you spray it.

Title: Re: First Time with Clear Glass
Post by: Robertfishes on July 12, 2009, 03:50:00 PM

new glass?, the Gordons Botuff clear glass I bought was sanded on one side from the factory,when laminating the shiney side goes outside, pre-sanded side inside.