Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Cody Roiter on February 09, 2009, 09:59:00 PM

Title: Need help with Hill Style Limb Sizes Tapers
Post by: Cody Roiter on February 09, 2009, 09:59:00 PM

Hello Guys, I am making a Hill style Longbow I just need the tapers of the limbs from riser to tip for both  limbs. then when I get them I am going to cut a copy on a CNC for a guide then I was going to mark them with a marking tool then sand the limb down.. I just need the taper sizes..
Thanks for the help..

Cody