Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: foamer01 on September 17, 2008, 08:28:00 PM
-
Just wondering if anyone would have any advice on a Band Saw Blade that would hold up to epoxy and fiberglass. Seems like I can only cut out about 1 or 2 bows before the teeth are pretty well chewed up. I am using PS Timberwolf Blades. I wonder if I should be using a different method for cutting out my bows. Thanks for your help.
-
That is a lot longer than mine last! I've heard the carbide tipped blades will last a good long while cutting glass, but they are pricey ($130).
-
Try useing a Bi-metal blade.
http://www.suffolkmachinery.com/bimetal_pricing.asp
-
there is a blade that I have used for cutting fiberglass and epoxy in other applications, it's not really a wod blade, it is actually for ceramic tile but work great and I have gotten much better life expectancy than a regular type blade.
Here is a link to one that should work
http://www.made-in-china.com/showroom/proworkcn/product-detailoMzJWklVYPhm/China-Diamond-Edge-Band-Saw-Blade.html
Also contact mebran.com they could tell you what would work best for that
-
I started out using the band saw to rough out my limbs but gave that away as a bad joke. The best thing I have ever used is a portable electric planner with tungsten blades. Cuts fibreglass and epoxy like butter and you get a lot of bows out of one set of blades, and blades are cheap anyway. I just rough it out near the line and finish off with the linisher. The electric planner does not heat the limb up either which is a big bonus, have to ware a mask though...Glenn...
-
LOOK LOOK, I talked to the master, and he gave me his inside scoop on the Bandsaw blades. You get them at General Tool. Portland OR and the blade He gets is Type N and four teeth per inch and then of course your length and I paid less than 13.00 per blade. They are awesome blades and last for ever so it seems. I am not kidding. I just ripped a tun of Ipe and it is still as sharp at it was when I put it on. If they don't do mail order I will hook you up and you pay for it and will call it and I will pick it up and send it your way. I am sure they mail tho but just in case. Good luck
-
I have had a lot of trouble trying to get a proper ripping blade for my bandsaw. A proper blade for ripping does not have a point it or a lot of set but that does vary from hardwood and pine, a ripping blade has a chisel tooth especially for hardwood. A chisel tooth is less likely to wander and will track a lot straighter when ripping. They always want to sell me some U-Beaut corse combination blade but I have found them not to be as good as they could. I will find someone who will make me a chisel tooth ripping blade one day. I don't know why they aren't more available here as nearly all of the cutting a lot of people do is ripping, I hardly ever cross cut anything on the band saw...Glenn...