Trad Gang

Main Boards => PowWow => Topic started by: KyleAllen on February 04, 2008, 10:33:00 AM

Title: arrow recommendation please.....
Post by: KyleAllen on February 04, 2008, 10:33:00 AM
I just bought some new limbs for my bob lee. I previously had 58# limbs on it. With the new 49# @ 28" limbs, my old arrows arent flying just perfect. I'm drawing 30 inches by the way. Shooting 125 grain heads.

So does anyone shoot a similar setup? If so, what arrow specs are giving you good flight?

I shoot carbons...mainly goldtip. I have shot 5575's pretty much exclusively.

thanks
kyle
Title: Re: arrow recommendation please.....
Post by: pumatrax on February 04, 2008, 10:36:00 AM
What's the arrow doing Kyle ?
Title: Re: arrow recommendation please.....
Post by: vermonster13 on February 04, 2008, 10:40:00 AM
A 100 grain insert might let you still use those with a 125 grain head. But you will most likely need to drop a spine to keep using a 125.
Title: Re: arrow recommendation please.....
Post by: KyleAllen on February 04, 2008, 11:06:00 AM
pumatrax, that a good question, lol. I really haven't paid too close of attention because ive been focusing too much on my shooting. I just know they are not giving me perfect boat propellers.

vermonster, i may try that.
Title: Re: arrow recommendation please.....
Post by: Bjorn on February 04, 2008, 11:07:00 AM
The drop from 58# to 49# is huge; and it will take a ton of metal to soften those shafts enough so you can use them with the new limbs, as you are already noticing.
Try bareshafting with a heavy insert and use a heavy tip, but I agree with Vermonster you will need new shafting-and why not?
Title: Re: arrow recommendation please.....
Post by: mike g on February 04, 2008, 11:09:00 AM
Aluminum or Carbon....
Aluminum I would say 2016....
Carbon Vaporwoods 3000 w/100 Grain Brass inserts and 125 up front....
Title: Re: arrow recommendation please.....
Post by: George D. Stout on February 04, 2008, 11:25:00 AM
Bjorn has it right.  I had some 55/75 Goldtips and could not soften them with 100 grain bh inserts and 125 grain heads, and that was with 50 pounds.  If you like Goldtips go with 35/55.  I like  2016 aluminum for that weight and length.
Title: Re: arrow recommendation please.....
Post by: KyleAllen on February 04, 2008, 12:09:00 PM
i appreciate the insight guys. I been kinda havin a hankerin to try some aluminum, so this might be a good opportunity.
Title: Re: arrow recommendation please.....
Post by: vermonster13 on February 04, 2008, 12:23:00 PM
George, Kyle is drawing around 55# on that bow at his draw.
Title: Re: arrow recommendation please.....
Post by: just a bit outside on February 04, 2008, 12:42:00 PM
I shoot that set-up and I use GT 35/55's. They fly perfect out of both my Zipper, my Border, and my Hybrid Southern Draw Longbow.

Greg
Title: Re: arrow recommendation please.....
Post by: George D. Stout on February 04, 2008, 02:52:00 PM
Vermonster13,  I figured that as well, but those stinkin' 55/75's are stiff though...you could use them to pry off hubcaps 8^).
Title: Re: arrow recommendation please.....
Post by: vermonster13 on February 04, 2008, 03:09:00 PM
I agree with you there. But if the arrows are full length with 100 grain insert he has a chance, though not a real good one with only 125 points.
Title: Re: arrow recommendation please.....
Post by: Kip on February 04, 2008, 04:32:00 PM
I bet you would like some 2018's works for me in my Lee with 56 and 54 lb. limbs.Kip