Text only | Text with Images

Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Izzy on July 07, 2011, 11:19:00 AM

Title: Sharpening D2?
Post by: Izzy on July 07, 2011, 11:19:00 AM
Ive worn out a stone on this blade I have and am having some difficulty getting it to where I want. Do I need a diamond hone? The last time I got it sharp it was deadly but Im having trouble with it this time. What are my options? Thank You, Izzy
Title: Re: Sharpening D2?
Post by: DANA HOLMAN on July 07, 2011, 02:00:00 PM
Izzy
I have had trouble with 5160 a couple times, I had to take it back to the belt sander with 600 grit and get the foil edge then I use a paper wheel to get it razor sharp, I know other guys use stones but I've always use the paper wheel. Hope this helps some
Dana
Title: Re: Sharpening D2?
Post by: Lin Rhea on July 07, 2011, 02:40:00 PM
Izzy,
      D2 is good steel, but should not be that different than others as far as sharpening. If you are not getting good results with the Arkansas stones, move back to the diamond stones and get a burr, then refine on the Arkansas. If you still have trouble, holler back and we'll look at what you got. Lin
Title: Re: Sharpening D2?
Post by: Izzy on July 07, 2011, 05:54:00 PM
Thanks fellas, Im gonna get me some KME equipment at Denton and we'll start from scratch.
Title: Re: Sharpening D2?
Post by: loyd on July 07, 2011, 08:21:00 PM
like someone said it takes a terable edge and holds it forever
Text only | Text with Images