Trad Gang
Main Boards => Hunting Knives and Crafters => Topic started by: SCRAP on August 06, 2010, 11:46:00 AM
-
Does anyone have a tutorial or a link to one showing a step by step blade forging process ? How do you minimize the upsweep of the blade when hammering the profile of the blade ? I end up with my blades turned up to the heavens on the tip end .
Thanks for any help .
-
Bend them the other way before you start thinning the edge. In other words, thin the inside of the curve.
Mark
-
This might help you on the upswept blade problem...tippit
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=110;t=002440
-
Scrap, if you could find a knife maker in MS, and there are several, they could probable help you out. Also read in Market bullitan that there is a forging class one a month at the trade mart building in Jackson. Also know a guy in Meridian who builds a great knife.
-
One way to handle this is to correct the radical curve as you go along, a little at a time. In other words, dont let it get too banana shaped before you try to make the correction. When it gets curved up a little, heat the whole blade evenly and whap it on the flat suface of the anvil, spine down.
Forging is something that is hard to desribe in a "how to". Anybody who can should take every opportunity to watch someone who is experienced.
Lin
-
James I don't know how serious you are ,but if you really want to learn,I highly suggest this!!!
Go to page #9 at the top of the page after getting to page 9 scroll down and click on Rooster on Dec 13th.read all that (and then go).
We have M.S.on this forum and JS all go way above and beyond on giving you the help you need and many other great craftsman ,but I still suggest this school!!!And anything I can do also
-
I use a piece of pine 2x4 to straighten the blade on the anvil. Just get it to forging heat and lay the spine on the anvil and whack it with the wood. It straightens it without deforming the edge like a steel hammer will. When your piece of 2x4 gets all buggered up, just toss it and get another one, or a big stick.
-
Thanks guys for all this information, I agree watching someone would be invaluable experience .I have been using saw blades , disk blades , leaf springs and such and grinding my final shape , i recently bought 10 feet of 1084 bar stock and 5 feet of 5160 and figured out pretty quick hammering a blade to shape and profiling it is going to require lots of practice .Longbow 55 thanks for the info I will check the market bulletin and try to make one of those classes. Rooster 1 I will read the info. on page 9 .
Tippit thanks for the tutorial that really helps a lot . I have been coming to this site for a long time but have never posted , the talent here is remarkable and i have learned all i know from this forum .
Thanks guys .