Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: polarbear on January 07, 2010, 09:56:00 PM

Title: Sanding Belts
Post by: polarbear on January 07, 2010, 09:56:00 PM

Looking for a supplier for 1"x30"very fine sanding belts. Any help would appreciated!I've already check most the woodworking cat.Thanks John T.

Title: Re: Sanding Belts
Post by: beaver#1 on January 07, 2010, 10:30:00 PM

jantz knife supply might have them.

Title: Re: Sanding Belts
Post by: Wampus on January 07, 2010, 10:50:00 PM

Trugrit has them up to 1000 grit.

 http://www.trugrit.com/belts1.htm

Title: Re: Sanding Belts
Post by: polarbear on January 08, 2010, 09:51:00 PM

THANKS GUYS

Title: Re: Sanding Belts
Post by: bowur on January 10, 2010, 07:33:00 PM

http://supergrit.com/products/products_belts-blacksc.asp

supergrit has a lot of different sanding belts for pretty cheap

Title: Re: Sanding Belts
Post by: LC on January 10, 2010, 10:34:00 PM

I get my belts from Industrial Abrasives [email protected]. I use the "everlast"aluminum oxide belts. They always have a special of buy a dozen get a dozen free so for the 2"x72" belts I use they are $47.25 or $1.96 each. You can mix and match grit sizes so I get a dozen 80grit and a dozen 120 grit. I usually get two knifes per belt or by changing the rotation can get a additional one or 3 knives per belt. Just depends on how much grinding I have to do. Their 1"x 30" belts are $20.85 for 24 belts.