Trad Gang
Main Boards => Hunting Knives and Crafters => Topic started by: DoubleLung on October 05, 2009, 01:16:00 AM
-
So I'm just looking to take a try with making a blade of my own. (I have limited experience with pre-made blanks) I have access to Farriers rasps and really like the looks of the ones I've seen on here. My question is can I soften the metal in order to work it to shape without a forge? I don't have a forge.
Also what type of metal is the Rasps made of?
Thanks in advance. I really enjoy looking at the pieces of art here.
-
Build a fire large enough to cover the rasp in coals. Leave overnight, come back in the morning and you are the proud new owner of an annealed rasp.
But, without having a forge you wont be able to retemper the knife, leaving it soft. It will still function as a knife, but it wont be as durable, or as sharp as youd probably like it to be. I suggest carefully working it without annealing. Dunk it in a bucket of water when it starts to get uncomfortable to hold.
Good luck. Dont forget some pictures when you get started.
Kid
-
I've read about alot of people tempering the knives in an oven. Will this not work with a rasp?
So I don't get confused, by "annealing" a rasp, it becomes soft and easier to work with right? That doesnt make it brittle and prone to breaking into lots of pieces?
-
Yes annealing is the softening of the steel. It wont be brittle at all.
Heat treating requires a forge to be more specific, you CAN temper in the oven. Youll need to get your blade to a nice red hot and quench in veggie oil. Then immidiately go to the oven at 400 degrees for an hour.
Atleast thats what I do with my rasp knives.
Kid
-
Thanks for the info!