Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Nosight on January 31, 2009, 10:08:00 AM

Title: Mixxer Truck Springs
Post by: Nosight on January 31, 2009, 10:08:00 AM

Hay all.. Thanks for the help up front..

I drive a mixxer truck and the shop has several sets of leaf springs that are no longer useable on the trucks..

Are the springs of this size useable just like the car spring???????

Thanks again for all the help..

Later.........Buzz

Title: Re: Mixxer Truck Springs
Post by: Lin Rhea on January 31, 2009, 01:42:00 PM

If it's a spring, it'll work. Are you talking concrete mixer? Must be a biggun. My favorite blades are from steel forged down from large stock. Lin

Title: Re: Mixxer Truck Springs
Post by: Nosight on February 01, 2009, 12:30:00 AM

SPring stack is about 9 inches tall and is 5 inches wide. There are 10 or 11 springs in the stack.

 So there will be more than alittle metal remove.

Thanks for the info Lin...

Later........Buzz

Title: Re: Mixxer Truck Springs
Post by: Mark N on February 01, 2009, 11:26:00 PM

A 1x30" belt sander will make quick work of it...