Anybody ever shoot these? My girlfriend got me a dozen of these shafts for christmas, and will be bringing them down with her this weekend when she come for a visit.
She bought me the STL Hunters in 200 spine. No idea how PSE spines thier arrows. I want to make up some front loaded arrows...anyone know the inside diamiter?
So anyone know about these?
I was shooting those arrows out of my 50# Kota longbow. You will need to keep them full length, and add 175gr up front to start. What is your draw length, and weight? I draw 27, so I was pull ing 47# shooting full length with the 175 up front. They flew perfect, and bare shafts hit exactly with my fletched. I will admit they were not the most durable arrows, and on the light side I delieve 6.7gpi. If you have any qusetions when you start to tune them feel free to PM me, and I will do my best to help. Oh I'm not sure what the inside diameter is.
SD
Ive shot them and didnt have any problems with breaking shafts and Im hard on arrows. They are a little on the light side though
my draw is 26.5 and usualy keep my arrows around 27.5" to 28". I'd like to get some weight tubes, and some 100gr brass inserts. I think that would make a pretty nice heavy [enough] arrow.
I will be shooting it from a widow (cut past center) at ~43 lbs.
I'm hoping the wight tubes will increas the weight and the spine enough to cover the extra 100 grain up front.
I got a couple about 2 years ago and like them. The 200 is 3555 I think, that is what I was told when I bought them to try.
I had them cut at 29.5" and used the standed insert, don't remember what they weighed, I think in the low 400gr. with 175gr field point.
I shot them with a 56lb recurve at 29" draw.
Alan
If the 200 spines same as the 3555 that would be perfect...I;ve already got that formula!!