Trad Gang

Main Boards => SPONSOR'S CLASSIFIEDS => Topic started by: Surewood Steve on January 31, 2013, 12:50:00 PM

Title: Surewood Shaft 28" & 29" Specials
Post by: Surewood Steve on January 31, 2013, 12:50:00 PM

We have an over stock of 28" and some 29" Doug Fir matched dozens that we are offering for $33.00/dz. plus FREE point and nock tapering.  You can add $6.00 for 10" tail taper to 5/16".  These shafts will give you 27" and 28" BOP. All shafts are 11/32 dia. Contact us at [email protected] or Private Message me or call Steve at 541-688-0493 Pacific Time.
 
28"       35-40   7dz.
28"       40-45  10dz.
28"       45-50  14dz.
28"       50-55  10dz.
28"       55-60   6dz.
28"       60-65   6dz.
28"       65-70   4dz.
28"       70-75   2dz.

29"       35-40   5dz.
29"       40-45   9dz.
29"       45-50   7dz.
29"       50-55   2dz.
29"       55-60   2dz.
29"       60-65   3dz.
29"       65-70   8dz.
29"       70-75   3dz.

           
Thanks, Surewood Steve.

Title: Re: Surewood Shaft 28" & 29" Specials
Post by: Surewood Steve on February 06, 2013, 01:28:00 AM

Thanks for the response and the good words.  Steve

Title: Re: Surewood Shaft 28" & 29" Specials
Post by: Surewood Steve on February 19, 2013, 10:32:00 AM

Just updated and will post other specials later, thanks Surewood Steve

Title: Re: Surewood Shaft 28" & 29" Specials
Post by: Surewood Steve on March 04, 2013, 11:32:00 AM

Just up dated the inventory and the special is still good on 28"& 29", thanks Steve.