Print Page - DAN Quallan brace height?

Title: DAN Quallan brace height?
Post by: elkbow on December 31, 2007, 05:16:00 PM

a buddy bought a dan quillan patriot and he was wandering about the brace height,62in,49lb at 28"

Title: Re: DAN Quallan brace height?
Post by: Red4arm on December 31, 2007, 05:29:00 PM

I have a 62" patriot 59lb @28 .. I shoot 7 in brace height .. not sure if its the recommended but it shoots best there for me.

Title: Re: DAN Quallan brace height?
Post by: joe skipp on December 31, 2007, 09:25:00 PM

Minimum 6" to 6 7/8"....that seemed to be the sweet spot for the few I sold here. Good bow...

Title: Re: DAN Quallan brace height?
Post by: elkbow on December 31, 2007, 10:17:00 PM

thank you gentlemen,he was told when he bought it that it was 6in but it just seemed low.thank you again!

Title: Re: DAN Quallan brace height?
Post by: Tradesmen4 on January 01, 2008, 08:34:00 AM

I have a canebrake and patriot. The sweet spot for canebrake is close to 6 and the patriot is between 6.5 and7.75 hope this helps. Greg

Title: Re: DAN Quallan brace height?
Post by: elkbow on January 01, 2008, 08:53:00 AM

thanks Tradesmen4,that bow shoots,i was very impressed with its performance.

Title: Re: DAN Quallan brace height?
Post by: longstiks on January 01, 2008, 10:05:00 AM

I Talked with Dan when I bought one of his bows and he said I could go down to 6" with a FF string.
Denny

Trad Gang