I have a recurve 55# at 28" My draw lenth is 27 1/2". I have been shooting it with a stick on bear arrow rest.I have been shooting Easton xx75 2213 arrow with 100gr points cut at 29".They flew good. But I wanted to start shooting off the shelf, I put on a rug type rest and started shooting. The arrow aren't flying good now.They are kicking to the side. I have feathers. Do I need more weight on the front? Or do I need other arrows? I have a few 2016, They are 31". I put a 125gr. point on them and tried them and they flew straight, But heavy in the front, They dropped fast when I moved back.Thanks
Mike:
2213's spine over 80#@28". Will need to know how deep your shelf is cut, is it less than center, Center or past center? If its less than center or center cut, I would suggest 2016's cut 29 BOP. So try cutting one of those 2016's to 29" and try it. If your bow is cut past center the 2213's should work but go to a 125-145 gr point.
Bob
I measured, And the shelf is past center,So I could use the 2213 and try more weight on the end. Thanks
If you went from a elevated rest to a rug you may need to move your nocking point because you have changed the dynamic tiller of the bow. If you were 3/16" above parallel you may need to go as much as 3/8" above parallel. I would start high and move down.