Trad Gang

Main Boards => Trad History/Collecting => Topic started by: Hamishhog on February 01, 2013, 01:23:00 PM

Title: Bear Takedown Limb Index Pin/Set Screw
Post by: Hamishhog on February 01, 2013, 01:23:00 PM

Does anyone know where I can find replacements for the Bear Takedown Limb Index Pin/Set Screw?
Or a standard size I might get from a hardware store?

Thanks for your help.
Steve

Title: Re: Bear Takedown Limb Index Pin/Set Screw
Post by: raghorn on February 01, 2013, 03:20:00 PM

It is not a special screw. Take the other out and check your local hardware store for and Allen head screw. If you find a screw with the correct thread but the head is too big, then file/grind it down. It's not even needed as it is just to prevent swapping the top and bottom limbs.

Title: Re: Bear Takedown Limb Index Pin/Set Screw
Post by: shick on February 01, 2013, 03:32:00 PM

Steve, if you can't locate it, I can send you one. Email sent.
Shick

Title: Re: Bear Takedown Limb Index Pin/Set Screw
Post by: Hamishhog on February 02, 2013, 02:05:00 PM

Thanks everyone for the help and especially Shick for the screws!