Trad Gang

Main Boards => Trad History/Collecting => Topic started by: NIGEL01 on June 03, 2012, 11:55:00 PM

Title: Green Bear spring quiver restoration?
Post by: NIGEL01 on June 03, 2012, 11:55:00 PM

I bought an Browning Nomad Stalker I tonite on the auction and it has a Bear spring quiver on it and the whole works is spray painted.  I've stripped down an Fury II with 100% acetone before and it turned out beautiful after some Tru oil and advise from you guys.  Plan on doing the same with this bow, but I was wondering if the acetone might damage the plastic quiver, dull it or even remove the Bear logo.  Any suggestions?

Title: Re: Green Bear spring quiver restoration?
Post by: stagetek on June 04, 2012, 10:17:00 AM

I would not use acetone on plastic. You might try a small spot with Goof-Off and see what happens. I'm not a chemist, but I think acetone would harm the plastic and erase the logo.

Title: Re: Green Bear spring quiver restoration?
Post by: NIGEL01 on June 04, 2012, 02:21:00 PM

Thanks all