Trad Gang

Main Boards => PowWow => Topic started by: jrchambers on December 13, 2007, 09:22:00 PM

Title: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: jrchambers on December 13, 2007, 09:22:00 PM
today i looked at a set of bl signature limbs i had strung and realized that there is a vertical crack in the glass right above the beefed up section for bolting.  it was there before but it seems to have grown.  i also realized that a one third section of the bolt on area was cracked and was actualy separated from the rest of the limb a very little.  this scares me because i cant see the second one untill the limbs are strung.  input please.  it would be a easy fix for some one who knows what they are doing.
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: hera on December 13, 2007, 09:25:00 PM
Can you show a pic about that?
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: jrchambers on December 13, 2007, 09:35:00 PM
i dont think that you could see it with a pic you have to look prety hard and i dont know how to post, i know there are posts all about that but im stretching my computability by just being here
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: Kip on December 13, 2007, 09:39:00 PM
I had a set of Lee limbs do that also same place but just the limb cracked about 3/8" not the cap.They were almost new sent them back and Ron replaced them.It was my second bow from him and I know I didn't over tighten them but it worried me.I do not think you can fix them.Kip
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: hera on December 13, 2007, 09:46:00 PM
I had Bob Lee classic TD recurve for about 6 years.
My BL problem is riser delamination !
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: D. Key on December 14, 2007, 08:47:00 AM
Call Rob Lee and speak with him.  You might send them to the factory and let them address the problem.  Worst case, you have to buy a new set of limbs.  JMHO
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: Doc Nock on December 14, 2007, 01:53:00 PM
For tiny cracks, I've had several bowyers just tell me to use super glue, have someone let it run in when the crack is opened the most at draw... let it dry. Done.

But sounds like yours is more severe...
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: jrchambers on December 14, 2007, 07:54:00 PM
(http://i249.photobucket.com/albums/gg211/jrchambers/001.jpg)
  there is a peice of paper slid under one side and the crack runs down the grain to the top of the bolt hole.  the other side is the same exept the crack runs into the glass instead of the bolt hole
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: jrchambers on December 14, 2007, 08:34:00 PM
ttt
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: AkDan on December 14, 2007, 10:50:00 PM
You using FF?

I believe widows switched to dynaflight due to problems similar to this.  YOu sould give them a call.  

To be honest, it's cracked for a reason, I wouldnt shoot it!
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: jrchambers on December 14, 2007, 11:39:00 PM
havnt shot them yet i got them used though, dont know what kind of string was used.
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: jrchambers on December 15, 2007, 05:00:00 PM
ttt
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: Shawn Leonard on December 15, 2007, 06:09:00 PM
AKDan it is a Bob Lee not Widow buddy. How old are the limbs? I would call Rob and see what he suggests before ya do the super glue fix. It works but Rob may suggest something else. Shawn
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: vermonster13 on December 15, 2007, 06:13:00 PM
Looks like they were over tightened. A few other bowyers' limbs tend to do that if overtightened.
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: Gene Roberts on December 15, 2007, 09:10:00 PM
No clue  sorry
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: dragonheart on December 15, 2007, 09:14:00 PM
Call Rob, he will be straight up with ya!
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: jrchambers on December 15, 2007, 09:21:00 PM
oh i know they were overtightened, i have no idea how old they are, probably not very, they are in great shape other than that, wich means nothing.  i did call rob and he said that i should send them in but there is nothing he could do anyway.  i think ill give the glue a shot see what happenes when strung then drawn.  if it doesnt separate ill try and shoot some really heavy arows, cross my fingers and wear a hard hat and some goggles.
Title: Re: limb cracks oh noooo, pics added, input please, want to shoot but not shure
Post by: AkDan on December 15, 2007, 10:52:00 PM
yikes...see what I get for paying attn  ;) !