Trad Gang

Main Boards => Trad History/Collecting => Topic started by: sendero25 on September 04, 2011, 07:28:00 PM

Title: Bear 76er
Post by: sendero25 on September 04, 2011, 07:28:00 PM

I need a string for an old Bear 76er, but there is no amo length printed on the bow, it may have been on a decal but if so it is missing.  Were all 76ers the same length? And if so what?  I measured this one and got 56", but I'm not sure if I measured correctly.  I started at the string groove and measured the bow by following the contour of the limbs to the opposite string groove?  Was this the right way to do it?  Thanks in advance.
John

Title: Re: Bear 76er
Post by: Danny Rowan on September 04, 2011, 07:58:00 PM

tip to tip on the back of the bow I believe following the contour.

Title: Re: Bear 76er
Post by: sendero25 on September 04, 2011, 10:05:00 PM

Thanks Danny, much appreciated.

Title: Re: Bear 76er
Post by: wadde on September 06, 2011, 01:17:00 PM

most were 58 inches long. a 54" string should do.

Title: Re: Bear 76er
Post by: sendero25 on September 06, 2011, 10:23:00 PM

Thanks guys,
Went to the local shop today and got a string, it is indeed a 58" bow. (The shop was closed Sunday, and yesterday due to the holiday)...we're good to go!

Title: Re: Bear 76er
Post by: Cyclic-Rivers on September 07, 2011, 09:56:00 AM

I made a 54" string for both of mine.