Trad Gang

Main Boards => Trad History/Collecting => Topic started by: 450 marlin on August 12, 2010, 05:01:00 PM

Title: Bear Premier Bowsight For C-Riser
Post by: 450 marlin on August 12, 2010, 05:01:00 PM

I have a broken sight body on my C-Riser, any help welcome...Roy
 (http://i516.photobucket.com/albums/u322/0710point/1281646172-1.jpg)

Title: Re: Bear Premier Bowsight For C-Riser
Post by: PAPALAPIN on August 12, 2010, 07:08:00 PM

Those things are hard to find.

Looking for one myself but if I hear of one I will give you first dibs.

I have two of them but I have one bow with the slide missing.

You will see the signts on used bows, but most have the slide missing.

Good luck

Title: Re: Bear Premier Bowsight For C-Riser
Post by: OldSkoolArcher on August 12, 2010, 07:31:00 PM

Are there different ones for A, B and C risers?

This is on a B.

  (http://i16.photobucket.com/albums/b14/COVEJEEPSXJ/bearsight.jpg)

Title: Re: Bear Premier Bowsight For C-Riser
Post by: 450 marlin on August 12, 2010, 07:43:00 PM

I have a few of the short ones that come on the Mags, This one mounts to a competition sight that mounts on the front of the C-Riser in the three holes on the front of the riser..Roy

Title: Re: Bear Premier Bowsight For C-Riser
Post by: OldSkoolArcher on August 12, 2010, 07:47:00 PM

OH OH. Gotcha. You are looking for the ring that came with the Bear-Jeffery Omni Sight.

Title: Re: Bear Premier Bowsight For C-Riser
Post by: OldSkoolArcher on August 12, 2010, 07:50:00 PM

(http://i16.photobucket.com/albums/b14/COVEJEEPSXJ/05_26_10-1.jpg)

Title: Re: Bear Premier Bowsight For C-Riser
Post by: PAPALAPIN on August 12, 2010, 07:53:00 PM

The part he is looking for is pictured at the top.

It will fit any of the premier sights but it has to use the slide that comes with the C Riser.

I assume the slide is still in his sight, he just needs the ring apperture.

Old Schools first picture is the apperture he needs, and tou can see the slide beneath it on the premier sight.

The Omni Sight is a whole nuther animal.  Different appertures, but he says that is the one he needs...confusing

Title: Re: Bear Premier Bowsight For C-Riser
Post by: 450 marlin on August 12, 2010, 08:55:00 PM

Yes, it is for the jeffery Omni-bowsight

Title: Re: Bear Premier Bowsight For C-Riser
Post by: PAPALAPIN on August 12, 2010, 09:07:00 PM

OK

You just made it tougher to find because things are like hens teeth

I do know of one in a pawn shop in North Georgi, but it is with a USAC COnstallation.  He wants $200 for the bow , sight, quiver full of abouit 24 aluminum arros, and he won't break the package.   I offered him $25 for the sight alone and he turned me down

Title: Re: Bear Premier Bowsight For C-Riser
Post by: OldSkoolArcher on August 12, 2010, 09:10:00 PM

The Omni sights bring big bucks and the target crowd scoops them up on a certain website...

The one I pictured sold for $150.

Title: Re: Bear Premier Bowsight For C-Riser
Post by: PAPALAPIN on August 12, 2010, 09:41:00 PM

The one I know of is oxidized pretty bad but it could be cleaned up, and all the parts are there.

Next time I go up I'll check to see if it is still there.  I may break down and buy the package.  The bow itself is well worth the money.  I have seen it three times over the last two years.  It may still be there.

Title: Re: Bear Premier Bowsight For C-Riser
Post by: 450 marlin on August 12, 2010, 09:56:00 PM

I have all the parts, just the ring is broken, but it may be wiser ti look for a complete sight

Title: Re: Bear Premier Bowsight For C-Riser
Post by: PAPALAPIN on August 13, 2010, 09:06:00 AM

I got two Check it sights.  I might cold take a picture