Trad Gang

Main Boards => Trad History/Collecting => Topic started by: cacciatore on June 07, 2009, 02:07:00 PM

Title: Bear TD quiver
Post by: cacciatore on June 07, 2009, 02:07:00 PM

What kind of quiver fit the green stripe TD riser? Do they have to be LH or RH or one size fits all? If you have any to sell I would be interested (LH)Thanks Felix

Title: Re: Bear TD quiver
Post by: raghorn on June 07, 2009, 02:44:00 PM

If you want the spring arm 8 arrow than you would need the long arm for the TD. If you are really lucky then the long upper AND lower arm. LH for sure for you.
There is a pic on this thread of the four arrow green plastic hood for that bow:
 http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=14;t=002583

Title: Re: Bear TD quiver
Post by: Grant Young on June 08, 2009, 04:14:00 PM

I use the shorter upper spring arm on my TD B riser. There is a right/left configuration but the lower bracket with the screw slot. can fit either side. When I say "short" spring arm, that's for the TD and converta quivers. The shortest arm that was available for the double spring systems is too short though they will work on a Super K. The short arm puts the attachment very close to the hood and produces considerably less vibration than the longer arm. Grant