Trad Gang

Main Boards => Trad History/Collecting => Topic started by: doug77 on November 07, 2008, 05:05:00 PM

Title: Help with Bow ID
Post by: doug77 on November 07, 2008, 05:05:00 PM

Bought a Bear Grizzly off E ---. Need some help .
Is is  58" 30 LBS what should the brace height be.Serial # is 5P3994 anyone know the year the bow was made. And also Bowdoc you have a PM
one more thing ware do I start with a nocking point
Thanks
doug77

Title: Re: Help with Bow ID
Post by: Migra Bill on November 07, 2008, 05:13:00 PM

Made in 1965. I'cc check on brace height but I usually start at 8 3/4 and start backing down till I find the sweet spot.

Title: Re: Help with Bow ID
Post by: wadde on November 07, 2008, 11:36:00 PM

1965 was the year and you will find a brace height of 7 1/2 will work nicely on that bow. Get yourself an inexpensive bow square and you can figure out where to put the nocking point in relation to how you shoot. split finger or three fingers under.