Trad Gang
Main Boards => Trad History/Collecting => Topic started by: tippit on January 09, 2005, 04:34:00 PM
-
I have just been pulling out some of my old bows that I haven't shot in years. How do I tell which type my '63 Kodiak mags are, so I can shoot them? Thanks...Jeff
-
Jeff,
I sent you an e-mail.
Chris Z.
-
Tippit
If you have a type 1 the best thing to do is give it to me this year at stockbridge! Ill make sure it is well taken care of. I have a type 3 and 2 I can email you pics of Or ill try and post them this evening.
Dean
-
TIPPIT
The difference between TYPE I,II, & III is the amount of glass & wood laminations that contact the riser
The TYPE I is the most radical dogleg and only has about 2-1/2" (?) of contacvt with the riser. THis is thr worse of the three
TYPE II is less radical on teh dogleg, and has more lamination contacting the riser. This one is also unsafe to shoot.
TYPE III has the least omount of dogleg and the lamination goes almost all the way down to the arrow shelf. o the best of my knowledge, this one is shooter.
However, as with all old recurves, inspect it good for any delaminations or other problems. If none, string it easy and let it sit a while. Flex it a bit and listen for strange noises. If it seems OK, I would shoot it from half drawy first, then 3/4 draw, then full draw, paying attention to any creaking or cracking sounds whil you do it.
These bows are fantastic collectibles. Better to have a solid wall hanger than a broken bow.
I have a type I. I strung it, flexed it, let it sit over night. The next day I shot it. It disintergrated in my hand. The upper limb split right down the center of the laminations. I sent it off to someone that glued it back togeter and it is a nice wall hanger, but you can tell it has been repaired.
I had to learn the hard way.