Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: SuperK 29.5 on November 09, 2007, 01:01:00 PM

Title: Old Bear Hunter Brace Height
Post by: SuperK 29.5 on November 09, 2007, 01:01:00 PM
I have a couple of old (late 60s - early 70s) 60" long Bear Hunter Recurves. Do any of you folks know what the original factory recommendations were for brace height?
Title: Re: Old Bear Hunter Brace Height
Post by: Bjorn on November 09, 2007, 01:30:00 PM
7.5-8"
Title: Re: Old Bear Hunter Brace Height
Post by: JDinPA on November 09, 2007, 05:21:00 PM
Bear Black bear Panther 7.5"
Bear Tigetcat 8"
Title: Re: Old Bear Hunter Brace Height
Post by: Deadbolt on November 09, 2007, 05:54:00 PM
my tigercat is sweet at 8"
Title: Re: Old Bear Hunter Brace Height
Post by: R. Combs on November 09, 2007, 06:54:00 PM
1969 bear kodiak hunter  8"
Title: Re: Old Bear Hunter Brace Height
Post by: SuperK 29.5 on November 09, 2007, 09:06:00 PM
Folks, I sure appreciate the info in your posts. I think I'll start at 7 1/4" for the sake of my somewahat longer than 28" draw and work up to the silent sweet spot. Thanks again!
Text only | Text with Images