Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Ari_Bonn on August 15, 2017, 12:53:00 AM

Title: uh oh nock problems
Post by: Ari_Bonn on August 15, 2017, 12:53:00 AM
So the other day I ordered some easton legacy 1916's and just now I realized its 9/32...

Where do I get a 9/32 glue on nock? Will 5/16 fit with a tiny bit of overhang?
Title: Re: uh oh nock problems
Post by: bucknut on August 15, 2017, 07:22:00 AM
I have shot them with no issues.
Title: Re: uh oh nock problems
Post by: Hermon on August 15, 2017, 07:36:00 AM
I thought that the 1916 Legacy used uni- bushings?
Title: Re: uh oh nock problems
Post by: JRY309 on August 15, 2017, 07:51:00 AM
Legacy have a swaged nock end,Camo Hunters and Platinum have a uni-bushing.The Camo Hunter uses a X-bushing for use with a X-nock,same nock as an Axis.For Easton 1813,1816 and 1916 the uni-bushing is called a X-bushing.
Title: Re: uh oh nock problems
Post by: black velvet on August 15, 2017, 08:04:00 AM
5/16 works fine.
Title: Re: uh oh nock problems
Post by: mahantango on August 15, 2017, 08:24:00 AM
Arizona makes a 9/32, but 5/16 are fine, you're only talking about 1/32".
Title: Re: uh oh nock problems
Post by: NY Yankee on August 15, 2017, 12:46:00 PM
Take an emery board and sand off a bit of the edge on the mouth of the nock to cut it back a bit. That should reduce the overhang to near zero.
Title: Re: uh oh nock problems
Post by: Gil on August 15, 2017, 01:06:00 PM
Lancaster has 9/32 nocks
Title: Re: uh oh nock problems
Post by: Ari_Bonn on August 15, 2017, 08:18:00 PM
Thanks guys appreciate it.
Text only | Text with Images