Trad Gang

Main Boards => PowWow => Topic started by: valleysniper on May 08, 2017, 07:35:00 PM

Title: Fletching cutting bow hand
Post by: valleysniper on May 08, 2017, 07:35:00 PM
Hi, anyone ever have this problem ? The way the riser handle is shaped on my A&h allows my hand to ride up and contact the fletching. Maybe use a glove on bow hand or any other suggestions  ?
Title: Re: Fletching cutting bow hand
Post by: mec lineman on May 08, 2017, 07:42:00 PM
Had the same problem with my a&h. If you are right handed try left wing feathers.that done the trick for me
Title: Re: Fletching cutting bow hand
Post by: Jack Denbow on May 08, 2017, 07:44:00 PM
Are you shooting left wing or right wing fletch? If I shoot right wing fletch I can feel the fletch hit my index finger, it is uncomfortable, but if I shoot left wing fletch no problem.
Jack
Title: Re: Fletching cutting bow hand
Post by: J. Holden on May 08, 2017, 08:16:00 PM
A friend of mine from here shoots an A&H riser.  He was gripping the bow and the meat of his hand would get in the way.

He now shoots with this doohickey that allows him to keep a looser grip on the bow.  Therefore the meat is out of the way.

Hopefully he'll see this and chime in on what it is he's using.  It wraps around his thumb and finger.

-Jeremy   :coffee:
Title: Re: Fletching cutting bow hand
Post by: Jayrod on May 08, 2017, 08:22:00 PM
QuoteOriginally posted by valleysniper:
Hi, anyone ever have this problem ? The way the riser handle is shaped on my A&h allows my hand to ride up and contact the fletching. Maybe use a glove on bow hand or any other suggestions  ?
I had the same issue also so mine has a new home now
Title: Re: Fletching cutting bow hand
Post by: Arcobsessed on May 08, 2017, 08:36:00 PM
I suspect the quill is hitting your hand.Different suggestions:

1. rotate your nock so the fletching is oriented differently.May not need much.

2. Elevate your nocking point some. Maybe your arrow is bouncing off the shelf and your hand.

3. Place a small piece of leather, matchstick or toothpick under your rest. This will provide more clearance. Don't forget to adjust your nocking point if you do this.

One of these three should solve your problem. Good luck and I hear those A&H bows are a great product. Congratulations.
Title: Re: Fletching cutting bow hand
Post by: macbow on May 08, 2017, 08:43:00 PM
I got a fat finger and I like my bows with the shelf close to my hand.
My solution is to whear a colf glove on,my bow hand, in addition I sew a path of leather across the top of the finger..

Now I do shoot right fletch and don't want to change.
Title: Re: Fletching cutting bow hand
Post by: The Whittler on May 08, 2017, 09:01:00 PM
I have an A&H and as long as I heel the bow I don't get a feather burn. I use left and right wing.
Title: Re: Fletching cutting bow hand
Post by: ChuckC on May 08, 2017, 09:20:00 PM
When you build your arrows, once the fletch are dry, take a dremel tool with a sanding drum.  Mine is variable speed and I use it on a slower speed.  

Sand down the leading edges of the fletch, at least the one facing downward.  Once you smooth the transition from fletch to arrow shaft, go ahead and put a drop of glue on each to further blend it and hold it better.  

That should solve some or all of the issue.  Can't tell you how many pieces of feather I have pulled out of my hands over the years. There is actually scaring from the cuts.  None since taking the time to do this.
Title: Re: Fletching cutting bow hand
Post by: crazynate on May 08, 2017, 09:24:00 PM
Had this issue with my predator when my jock point was to low. Or twist your nocks until you get better clearance. Try shorter feathers too. That will help and with less helical.
Title: Re: Fletching cutting bow hand
Post by: valleysniper on May 08, 2017, 09:30:00 PM
Thanks guys, thought I was really doing something erong. I use leftwing fletch, tried cock feather in slso. I will rotate also and see how it does
Title: Re: Fletching cutting bow hand
Post by: Deno on May 09, 2017, 01:33:00 AM
X2 what Chuck said.
Small drop of glue on the front of the fletching.
I flatten mine with the edge of a screw driver first so they don't lift going into the targets.
Deno
Title: Re: Fletching cutting bow hand
Post by: Trenton G. on May 09, 2017, 07:36:00 AM
I have this issue but only when shooting in the winter. I don't know if the temperature has something to do with how the arrow leaves the bow, or if I have so many clothes on that it affects my release, but when it warms up I don't have that problem. I actually used to shoot with a piece of tape over the top of my finger to keep it from bleeding.
Title: Re: Fletching cutting bow hand
Post by: Kromer on May 09, 2017, 08:18:00 AM
Had the same with my Hoyt. Turn cock feather to 12 o'clock position, worked for me.
Title: Re: Fletching cutting bow hand
Post by: valleysniper on May 09, 2017, 08:28:00 AM
I've been using the tape on my hand trick also. I have a scar on my hand it's been cut so much
Title: Re: Fletching cutting bow hand
Post by: The Whittler on May 09, 2017, 09:19:00 AM
For me it's not the leading edge it's the feather it self. And I always put a drop of glue on each edge of the feather.
Title: Re: Fletching cutting bow hand
Post by: JARHEAD1371 on May 09, 2017, 09:48:00 AM
I had the same issue with my A&H. After a call to them, I raised my nocking point and it was solved. They suggested 1/2-3/4" high. It gives you a slight nock high bare shaft, but it shoots great.
Title: Re: Fletching cutting bow hand
Post by: MnFn on May 09, 2017, 09:58:00 AM
You can also burnish the leading edge of the fetching by rubbing it with a screwdriver shaft, in addition to the drop of glue.
Title: Re: Fletching cutting bow hand
Post by: YosemiteSam on May 09, 2017, 03:34:00 PM
Just raise the nocking point.  Some of my selfbows are shot right off the knuckle and I get no scratches at all.  My feathers are all right-hand but I practice right and left handed and it has made no difference either way.

It's a good fix anyway since if your feathers are rubbing anything very hard, they're going to wear out faster.  A bow glove may mask the problem but it would be best to deal with the underlying issue.
Title: Re: Fletching cutting bow hand
Post by: acedoc on May 09, 2017, 06:24:00 PM
Use a higher rest and shorter feathers
Title: Re: Fletching cutting bow hand
Post by: OBXarcher on May 10, 2017, 12:08:00 PM
Me too. Just put a little pad on shelf and problem solved. Love the bow.
Title: Re: Fletching cutting bow hand
Post by: flyguysc on May 10, 2017, 09:36:00 PM
Raise nock point