Trad Gang
Main Boards => PowWow => Topic started by: KyRidgeRunner on May 05, 2017, 10:15:00 PM
-
Anyone out there shoot two different types of arrows from one bow? I'm considering this because I'm building up a set of uefoc arrows for my bow to hunt with this fall but I'm gonna have a bunch of money tied up in these shafts. So I would like to shoot some cheaper shafts when on the 3D range, when stumping, bird hunting, frogging, etc. Any of you guys have 2 sets of carbons tuned to one bow for this purpose?
-
All of the above. I will try all, use a few out of a dozen while practicing, but most other shooting is done with old aluminum arrows. I have had some given, had some in a bucket of old stuff, and bought several real cheap. I see you are also from Ky. If you were at Tradfest and knew me you would have seen me shooting arrows I bought there from someone's dollar bucket.
-
I have to setups for my Shrew Classic Carbon, one is a heavy FOC for Elk, Bear and Hogs with a !60 Snuffer or Tree Shark on a CX Heritage 250 with a heavy broadhead adaptor. The other is fast and flat CX Heritage 150 with a 125gr G5 three blade for deer.
-
I shoot wood exclusively from my Hill bows. I have several who will shoot multiple spine ranges well. However, most of the time I shoot 50 - 55#. I don't hesitate to shoot arrows from different sets during the same practice session or 3D round. I have several partial sets, but they are all the same specs, so they shoot just fine.
-
Sure, it is not uncommon to have different tools for different purposes, including arrows for any particular bow. Light ones for fast flat target shooting, heavier ones for day to day hunting, real hefty ones for those days I seek out much more difficult game.
-
Once I determine what I'll be hunting with in the fall, I shoot them all summer for everything. That can get expensive but it's just how I like to do it.
Determining what I'll be using to hunt with in the fall is process. Seems I usually change something every year. Bow, shafts, or heads.
I just got a pack of Centaur Big Game Heads. My god they look serious.
-
Yep. My normal 3D and deer set up is a fast flying .400 Beman ICS. It is hard hitting and flies very well. I also have an arrow set up that is .340 Beman with a lot of weight up front. It is slower, but it hits really hard. I guess I could use it on anything bigger and tougher than deer or deer that hide behind trees.
-
I shoot multiple sets of arrows from each bow. I usually have. A few sets close on spine. If anything I swap out tips for different weight. I see no reason to use my more expensive shafts for practice or stumping.
-
I have carbons, aluminum, and woods for my bows. I do pick the best flying woods and save them for hunting. The rest are practice/3D arrows. I do have one bow that lives in Pa. at my son's house. I would use the same arrows for both hunting and 3D.
-
Im a user of heavy hunting arrows.... like everything, it has its own set of advantages/disadvantages. My present hunters are about 700gr. Making up a light 3D arrow, I ended up with just under 400gr. Its a bust for me, because there is enough difference in trajectory/point of aim, that if im use to my hunters I shoot well high with the 3D arrows. If I shoot enough for my mind to adjust with the 3D arrows, my hunters go well low. In my case, there was just too much difference, and it takes too long for my mind to adjust. So, im opting for a bit lighter hunter in the 600gr area, and will use one arrow for both play and hunting. Id think a lot of variables would come into play per each individual and their set ups.
-
Yep.
Easton Axis Traditional and Deep Six Injexion out of my mid 40# draw weight bows.
-
Good stuff here guys, thanks for the replies. My weight will be about the same, just my "playing" arrows will be much cheaper than the arrows I'll be using on white tails and turkeys.
-
Heck fire multiple arrows from multiple bows and multiple bow weights. That's where it's at. Bowhunting is easy if your concentrate on it and ignore all the misconceptions of the equipment jargon lingo
-
I use the cheap gold tip hunters for small game and hog arrows and use the goldtip pro's for tournaments and big game
-
Why not, but once it gets a couple weeks from hunting season, whatever I'm hunting with is all that gets shot
-
Not me! I practice with what I hunt with!
Bisch
-
My quiver makes me look like a peacock. Various lengths, spine and feather configurations. From old or no longer owned bows . I have an idea of the relative weights and pines but shooting for form allows me to just have fun- until it's fur time, then I narrow it down to my hunting shafts
-
i have a few different arrow set ups tuned to my bow but i generally just shoot my favorite combo 99% of the time
-
I don't use cheap arrows for nothing. I want the best coming out of my bow whether it's a bunny or a buffalo...
Pine cones to mushrooms I aim to hit what I'm aiming at and expect to hit it...
So don't put a second-rate arrow in my quiver please.....ever.
-
DAAAMMMNN T !!! Priorities !!! Tell it !!!
-
My trinity longbow (being rebuilt) could group 340 beman ics with 125 gr fields and 300 Axis with 150 grain fields together. I used to have trouble with black Eagle shafts. I am using the beman as training and the Axis for use as a hunting arrow for when I get a chance.
-
Douglas Fir and Arrow Dynamic Lites from my Fox Royal Crown. I may have to change my brace height a small amount, but that's it. A first class bow with first class arrows.