Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: nhbuck1 on April 23, 2017, 02:07:00 AM

Title: Tune aluminums
Post by: nhbuck1 on April 23, 2017, 02:07:00 AM
Can you bareshaft tune aluminums? Or is it a different process
Title: Re: Tune aluminums
Post by: Biathlonman on April 23, 2017, 03:49:00 AM
You can, I usually paper tune I find it quicker and more convenient.
Title: Re: Tune aluminums
Post by: Wheels2 on April 23, 2017, 06:56:00 AM
I shoot bare shafts and watch the arrow flight.
Nock high?  Lower nock point.
Tail left?  Too weak.  Correct accordingly.
Title: Re: Tune aluminums
Post by: The Whittler on April 23, 2017, 10:16:00 AM
X2 for Wheels2 easy to do.
Title: Re: Tune aluminums
Post by: smokin joe on April 23, 2017, 10:19:00 AM
Bare shaft tuning works well with aluminum shafts.
Title: Re: Tune aluminums
Post by: M60gunner on April 23, 2017, 03:08:00 PM
There is a YouTube video of Ken Beck from BW tuning alum shafts. Not the one he tunes carbons. He is real, real good at it. In an interview years ago for Traditional Bowhunter he talked of bare shafting out to 70 yards!
Title: Re: Tune aluminums
Post by: DarrinG on April 23, 2017, 03:42:00 PM
Yes, bareshafting aluminum shafts works very well.
Text only | Text with Images