Anyone have any experience with these heads? I'm looking to get some to replace my grizzly single bevel heads as a more affordable set up.
Have you thought about not killing so many critters?? I have found through my research that if I don't shoot many critters I don't need many broadheads, LOL!!
I do like buying broadheads though, so now if the critters would just read the game plan!
I shot the Tuskers Concordes and really liked them. Excellent penetration
Personally I would stick with the grizzlies. The Tuskers come really rough. You will need to grind a bevel and spend a decent amount of time doing it. Also I had better luck aligning the screw in adapters in the Grizzlies. Unless you have a lot of free time stick with the Grizzlies. Worth the extra money!
QuoteOriginally posted by shedhunta:
Personally I would stick with the grizzlies. The Tuskers come really rough. You will need to grind a bevel and spend a decent amount of time doing it. Also I had better luck aligning the screw in adapters in the Grizzlies. Unless you have a lot of free time stick with the Grizzlies. Worth the extra money!
Yikes! I thought the Grizzlies came rough. Have have to spend about 15 minutes per head just to get them ground down which stinks. If the Tuskers are worse that would be a deal
Breaker
Shedhunta is spot on. I tried a few Tuskers and quickly wore out a new file and my patience. After my experience with them it made me really appreciate Zwickey Eskimos.
Its well worth the extra money to get Abowyer or Tuff head/Meat heads, or Cutthroats. Saves a ton of work sharpening and aligning.
I had some too. A lot of work. You would take less time knaping flint.
I have both Tuskers and Grizzlies a couple different styles and weighs of both and honestly they both sharpen about the same way. I personally contacted both suppliers and got their own sharpening tips.
I have had good luck with both, the Tuskers seem to hold an edge a little better over the Grizzlies but not enough to be a game changer. To me it boils down to cost and availability as they are both great head's!
A couple yrs ago Kme used to presharpen these heads for Braveheart Archery. I still have 6 of those heads.
Last yr I ran a test on fresh, still wet, cow shoulder blades. I shot many of the top brands of broadheads through those big cow blades. I had heads break, edges roll over, bend, you name it, many heads failed. However, I was unable to harm the Tusker Concorde, it was one of the best heads tested.
People sure are after the easy way.
Take it for what it is worth. When I was in Australia, we had a buff skull that was in camp mounted to a tree and used for target practice to test broadheads. Both compounds and trad bows were used. The broadhead that consistantly broke on impact were Tuskers. No, nothing was penetrating through that tough skull, and it probably would never matter in normal hunting situation, but just providing information. Those belonged to other people, as I brought tuffheads with me. I have some of the tuskers in my broadhead cases. They were tough to sharpen, and with that I would expect them to hold an edge well, but can't say that they seem to stay sharp better than the grizzlies or other heads that I have stored.
based on my personal expereince with tuskers is I was having a hard time getting a sharp edge the steel is tough! but when I came home with a brand new file they sharpened right up,,,, now not saying other people have dull files but i think mine was a little too dull for the tusker steel because that same file sharpens my griz, ma1's and stos heads fine but those are really touch up jobs.
Tuskers seem to me that yeah they are a pain at first but they stay sharp along time and they are tough, with due respect to PDK because I'm shooting at local critters that don't really dull many heads anyway.
I like a challenge and I like having a bunch of different broadheads around so will always have tuskers around.
Hard to beat a Grizzly. I do like the single bevel zwicky no mercy though. RC
I guess my expectations aren't as high as some, I have been sharpening, my broadheads for (let's just say many years) and I didn't think either heads were that hard to sharpen.
The Tuskers Were the Aztec double bevel, and Grizzly single bevel both got hair popping sharp with a little effort maybe 10 minutes per head.
QuoteOriginally posted by pdk25:
Take it for what it is worth. When I was in Australia, we had a buff skull that was in camp mounted to a tree and used for target practice to test broadheads. Both compounds and trad bows were used. The broadhead that consistantly broke on impact were Tuskers. No, nothing was penetrating through that tough skull, and it probably would never matter in normal hunting situation, but just providing information. Those belonged to other people, as I brought tuffheads with me. I have some of the tuskers in my broadhead cases. They were tough to sharpen, and with that I would expect them to hold an edge well, but can't say that they seem to stay sharp better than the grizzlies or other heads that I have stored.
I noticed the same thing at 265fps. If you hit a rock or something hard like that, they break at the welds.
I also like the Zwickey single bevel no mercy heads. I have had great luck with them on cedar arrows.
I've been bowhunting almost 40 tears now. Then, broadhead sharpening was part of the whole experience. Seems like now opening a package, for most, has taken it's place. It's really pretty sad.
QuoteOriginally posted by Butch Speer:
I've been bowhunting almost 40 tears now. Then, broadhead sharpening was part of the whole experience. Seems like now opening a package, for most, has taken it's place. It's really pretty sad.
For me the little bit of money saved on tuskers vs grizzlies is not worth my time. In this day and age of both parents working and raising children I have to do what I have to do to save time. If I do not save time then I have to give up hobbies. Sad maybe? But it is my reality for now.
I don't want to bash anything. I was just giving my experiences. I still have some tuskers, but they don't do any better than the other heads I have. Everyone has different levels of time, ability and patience for sharpening broadheads. Nobody in their right mind would by them without a bevel already ground, so I see no need to disparage those who don't like the extra effort to do the initial sharpening of Tuskers or other heads. I can tell you that when I was doing it I had some tendonitis in my fingers that really acted up from the extra pressure and effort needed. I also think it is great to be able to open a package and have them ready or nearly ready to go regarding sharpness, like the cutthroats, but it is useless if you can't resharpen them later when they need it.
I miss the old Ribteks. Another Auz head now I guess gone forever.
Some metal has a longer grain in it, as it was explained to me by an engineer at an area parts maker for the military, and some metal has short grain that acts more like glass. I like metal that gets almost a soap feel under the file when the edge is flat. To my surprise those those cheap sell off Ribtecs have that kind of metal and they hold a sharp edge as well as anything.
QuoteOriginally posted by Ground Hunter:
I miss the old Ribteks. Another Auz head now I guess gone forever.
Check with biatholonman he was selling off some ribbies.
Some tuskers come prepared sharpened.
QuoteOriginally posted by Butch Speer:
I've been bowhunting almost 40 tears now. Then, broadhead sharpening was part of the whole experience. Seems like now opening a package, for most, has taken it's place. It's really pretty sad.
I admire people who get satisfaction from sharpening, arrow making, etc. for me spending 2 hours sharpening (or I should say grinding down to a sharpenable edge) on a new package of broadheads in mid-November is not fun!
Different strokes for different generations, why would you wait till November to be sharpening broadheads?
I'm building arrows and sharpening broadheads in January and February getting ready for October.
I'm not judging or knocking I'm just saying.
This is getting a little ridiculous. I can sharpen my broadheads just fine, but to act like there is an advantage to a broadhead being more difficult to sharpen is a little silly.
I had some Astecs, and killed a couple of hogs with them....I also had some Concords that I got REALLY sharp...so sharp I wouldn't sleep in the same house with them....fraid they would get up in the middle of the night and kill me.
I gave those Concords to a fiend of mine as he has surgery and had to drop down in weight.
Did my bevel leveling on a belt sander....and normal sharpening from their with a Jewel Stic.
QuoteOriginally posted by Tater:
Different strokes for different generations, why would you wait till November to be sharpening broadheads?
I'm building arrows and sharpening broadheads in January and February getting ready for October.
I'm not judging or knocking I'm just saying.
Have you ever killed 4 deer, one hog, and two coyotes in a week? The same week I missed 3 coyotes in a day, all hit rocks Lol I had to buy new ones
QuoteOriginally posted by Michael Arnette:
QuoteOriginally posted by Tater:
Different strokes for different generations, why would you wait till November to be sharpening broadheads?
I'm building arrows and sharpening broadheads in January and February getting ready for October.
I'm not judging or knocking I'm just saying.
Have you ever killed 4 deer, one hog, and two coyotes in a week? The same week I missed 3 coyotes in a day, all hit rocks Lol I had to buy new ones [/b]
:scared: dag gum! That's a weeks worth of hunting!
Michael,
That's some serious shooting, I'm not in that target rich an environment.... :notworthy:
I failed to put a sharp edge on the Concords instead I put a scimitar tip on it. I'm just bad at sharpening. But each model has a bloody sharp version. pre sharpened. Hey Terry those heads will do to a hog what those Clemson tigers did to the sec right!?!?