Trad Gang
Main Boards => PowWow => Topic started by: YosemiteSam on January 24, 2017, 04:03:00 PM
-
I'm playing around with my selfbows again (rain subsided). I tried using my index knuckle against the shaft as a draw check. When I felt the metal on the back of the tip touch my knuckle I released. My groups tightened substantially and I even busted a nock (saw the dent on the back of the taper, too). Why is this not discussed as one possible "psycho trigger?" Is this a safety issue to worry about with split shafts? What am I missing?
-
It's one method some like to use with broad heads, not sure if it goes the same for field points. I liked the idea for BH's, but found it was distracting to feel the back of the head. I imagine it works better with a "touch and release" sort of style - I usually hold for a second or three at anchor.
Seems like another example of if it works for you, then it works!
-
My most accurate hunting arrows are net length blunts. I can feel the lead edge of the blunt on my index finger. This system of course would not be any advantage to those who shoot bows that does not allow the arrow contact with the index finger. For me it works like a clicker, when I shoot arrows that too long to do this , my draw length control begins to suffer. I make one set of net length target arrows every year. In the fall the target points come off and the blunts go on. I am always surprised how sweet net length cedar and fir arrows fly out of longbow.
-
Howard Hill mentions the back of the broadheads touching his hand before releasing. I often thought that was a reason his blunts and field arrows were shorter, he used the back of the point as a reference. Watching and listening to Schulz shoot you realize Hill had at least two references to let him know he was at full draw. Works well with that style bow.
-
Arrows would have to all be the same length to BOP.
What changes when you wear a glove?
With a broadhead, I always worried about the possibility of pulling the arrow nock off the string if I drew to far back in the moment of excitement.
-
Originally posted by M60gunner:
Watching and listening to Schulz shoot you realize Hill had at least two references to let him know he was at full draw. Works well with that style bow.
What was the second reference point?
-
one thing I did to help learn full extension on every shot was I cut my arrows only 1/8"past my riser. So I draw and with my secondary vision keep an eye on my arrow coming all the way back. Not on every shot but just every few. It actually taught me to know what full draw really meant and now I've done it so much I don't even think about it when I shoot. Amazing what the subconscious an learn.
-
Good way to pull an arrow off the string if you ask me
-
The only problem with it is when using a head that's sharpened on the back side. I've nicked fingers, cut an edge of the plastic clip on my hip quiver, and even cut a string in half with my ABS Massai heads.
-
It must work. I believe Fred Bear shot that way.