Trad Gang

Main Boards => PowWow => Topic started by: Kevin L. on October 29, 2007, 05:17:00 PM

Title: Did I just ruin my bow??
Post by: Kevin L. on October 29, 2007, 05:17:00 PM
Well,
 After over 10 years of shooting traditional, I just had my first broken string, on my new-to-me Palmer recurve. In the middle of a release, I hear this awful BANG and my arrow landed right in front of me. The black bundle in my string broke just down from the nocking loops on both ends, leaving the bow in an unstrung position and the string in front of the riser. Scared the #$%@ outta me!

My question is this: I inspected it over pretty well, and can't find anything broken or cracked. Am I missing anything I should check? Limbs aren't twisted, no cracks in the glass, riser seems fine...... But it was such a bad-sounding noise, I want to be sure I didn't damage the bow. Any help or advice would be appreciated.

TIA,

Kevin
Title: Re: Did I just ruin my bow??
Post by: Bjorn on October 29, 2007, 05:26:00 PM
Been there, and had that happen twice. It is very scary at the time, and aside from a little fright on my part, my bows had no negative effects. The riser may be a bit more fragile than the limbs; but as a fly rod maker you know how to inspect wood. I would follow the "if you can't see a flaw there is no flaw" rule.
Title: Re: Did I just ruin my bow??
Post by: the Ferret on October 29, 2007, 05:31:00 PM
Look it over very carefully, if you can't see any damage chances are there isn't any. Put a new string on it and shoot a couple partial draw from the hip so to speak. If everything goes well, shoot a couple 1/2 draw then 3/4 draw then full draw.
Title: Re: Did I just ruin my bow??
Post by: Ian johnson on October 29, 2007, 05:32:00 PM
it has happened to me twice, did not harm the bows
Title: Re: Did I just ruin my bow??
Post by: Kevin L. on October 29, 2007, 05:40:00 PM
I just went over it again and still can't find anything wrong. I may have gotten lucky, this time. Lordy, if I had hair, it'd be white after that.

It's a 60" recurve, am I correct in thinking it takes a 57" string? I used to know, but can't remember if it was subtract 4" for longbow and 3" for recurve, the other way around, or something completely different.

Thanks,

Kevin
Title: Re: Did I just ruin my bow??
Post by: Bjorn on October 29, 2007, 05:42:00 PM
It is 'the other way around'. Contact Chad at recurves.com
Title: Re: Did I just ruin my bow??
Post by: Ironman on October 29, 2007, 05:44:00 PM
I would take the limbs off and also check the riser and limbs.
Title: Re: Did I just ruin my bow??
Post by: deertraks on October 30, 2007, 07:32:00 PM
:scared:  Man, that's a bad sound and my hair is already white.
Title: Re: Did I just ruin my bow??
Post by: bentpole on October 30, 2007, 07:34:00 PM
How's the bow Kevin?
Title: Re: Did I just ruin my bow??
Post by: Kevin L. on October 30, 2007, 08:50:00 PM
It seems to be OK. I can't find any marks, cracks, chips, etc. Seems I dodged the bullet on this one, but I still gotta find a new string for it. I'll have to order one, since none of the local shops carry flemish strings. Rifle season has started, so it'll have to wait until I'm done guiding for the season.