For you Tall Tines owners:
Are Tall Tines limbs tillered for a particular riser or can they be interchanged?
Also, if a set of limbs are 52# on the 16 inch riser, what would the draw weight be on an 18 inch riser? I am thinking the limbs would be lighter on the 18 inch riser.
I would call Brian
He's a nice guy
Email him he will get back to you.
They are interchangeable from one recurve to another anyway.
I bought a set of 48# limbs for my 55# recurve and they fit perfectly.
But call Brian, it's a good reason to talk with a great guy.
What do you have up your sleeve, Paul???
Bisch
QuoteOriginally posted by Bisch:
What do you have up your sleeve, Paul???
Bisch
Ha! Just trying to find a lighter set of limbs for my Tall Tines. I love this bow -- just don't want to shoot 3d with 60 lbs.
For the most part interchangeable. Generally will lose 2-3# going to the longer riser, depending on the original draw weight.
I recently bought a 16" riser and long limbs for a 62" bow from Brian. I asked for something in the 50 lb at 31" range just for hunting. He had a riser and limbs available that were 44 lb at 28" and he said it should be smooth at my draw, they turned out 51 lb at 31". I asked if it was tillered for 3 under, he said don't worry just set the nock at 7/16" and you will be fine. He was spot on. Wow what a sweet shooting smooth bow!!!!!! I always shot 64" bows at my draw but this is one shooting machine!!!! Going to order another.
Thanks for all of the responses!