Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: frassettor on October 28, 2007, 05:40:00 PM

Title: CX 250 or 2117?
Post by: frassettor on October 28, 2007, 05:40:00 PM
Would the CX 250 or the Easton 2117 work out of my bow do you think? Looking for a beey arrow. Im shooting a BW PMAV  64 inch td 54@28. I know the 2216 tuner shaft is way to stiff. Thanks in advance!  :thumbsup:
Title: Re: CX 250 or 2117?
Post by: NDTerminator on October 28, 2007, 05:52:00 PM
You might try 2413's.  I shoot 2413's out of my recurves and get great flight from 50#-57#.  My 30" 2413's with 125 grain point and vanes weigh 525 grains...
Title: Re: CX 250 or 2117?
Post by: JBiorn on October 28, 2007, 05:58:00 PM
How 'bout some woodies?  :bigsmyl:
Title: Re: CX 250 or 2117?
Post by: frassettor on October 28, 2007, 06:06:00 PM
I dont have any experience with wood, much less with anything else.
Title: Re: CX 250 or 2117?
Post by: Jwilliam on October 28, 2007, 06:32:00 PM
A good friend of mine shoots 2117's out of his PSA. It is also 54#@28".


Bill
Title: Re: CX 250 or 2117?
Post by: jimneye on October 28, 2007, 08:08:00 PM
I shoot a PSA 53@27, 8 1/2in brace, with a 28in 2117 and a 175gr head, 550gr total, bare shaft shoots real nice and quiet.
Title: Re: CX 250 or 2117?
Post by: X2 on October 28, 2007, 09:47:00 PM
2117's and 2216 spine almost the same (78 and 80).  When I shot widows I shot a 2117 but it was 62lbs at 28 inches.  I would try a 2115 if I wanted a light arrow, or a 2020 if I wanted a heavy arrow.
Text only | Text with Images