Trad Gang

Main Boards => PowWow => Topic started by: Guss on October 27, 2007, 10:23:00 PM

Title: Morrison Cheyenne Brace Height
Post by: Guss on October 27, 2007, 10:23:00 PM
Just got my new 58" Cheyenne. What brace height should I start with? Are you measuring it from the throat of the grip. It is SWEET!!
          Thanks, Jr.
Title: Re: Morrison Cheyenne Brace Height
Post by: Danny Rowan on October 27, 2007, 10:39:00 PM
Check out Bob's site under charts and it will tell you the recommended brace. Cannot help you on a 58" but my 56" is 6 1/4 to 6 3/4. Yes from the throat of the grip.

Danny
Title: Re: Morrison Cheyenne Brace Height
Post by: Hoser1268 on October 27, 2007, 10:46:00 PM
My 58" Cheyenne shoot nice and quiet at 7 inches.
Title: Re: Morrison Cheyenne Brace Height
Post by: Hoser1268 on October 27, 2007, 10:46:00 PM
Title: Re: Morrison Cheyenne Brace Height
Post by: Guss on October 27, 2007, 11:00:00 PM
Danny, I did look at the chart, what's confusing me is the string has almost no twist in it and the brace is at 7 1/4.  Jr.
Title: Re: Morrison Cheyenne Brace Height
Post by: Arrow Slinga on October 28, 2007, 12:10:00 AM
My 58" also shoots great at 7" and that is were bob told me to start around. My string measures about 55 and one quater inches tip to tip  unstrung and it does have some twist to it.
Todd
Title: Re: Morrison Cheyenne Brace Height
Post by: Danny Rowan on October 28, 2007, 04:56:00 AM
Guss,

Call Bob, maybe you got the wrong string, stuff happens and I know for a fact Bob will get ya the correct string for it.

Danny
Title: Re: Morrison Cheyenne Brace Height
Post by: Guss on October 28, 2007, 10:17:00 AM
Thanks guys for the info. I'll check the string length unstrung, and go from there. Jr.
Title: Re: Morrison Cheyenne Brace Height
Post by: Jeff Mccarthy on October 28, 2007, 10:37:00 AM
I've had the best luck at 6 3/4, nothing less than this has worked for me.
Title: Re: Morrison Cheyenne Brace Height
Post by: Hawkeye on October 28, 2007, 10:52:00 AM
My "sweet spot" on my 58" is 6 1/2".  Bob said 7" when I asked, but when I told him how it was shooting at 1/2" less, he said "Leave it there."


Daryl
Title: Re: Morrison Cheyenne Brace Height
Post by: snag on October 28, 2007, 11:52:00 AM
The old "don't fix it if it ain't broke" theory. I haven't met or talked with Bob, but I think I like him!