Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: TxSportsman on August 18, 2016, 02:44:00 PM

Title: Holm-Made River Runner brace height question
Post by: TxSportsman on August 18, 2016, 02:44:00 PM
I emailed Chad but was hoping someone else would be able to chime in sooner. For anyone owning one of his bows, where does he measure brace height from? Is it the throat of the grip or elsewhere? Thanks!
Title: Re: Holm-Made River Runner brace height question
Post by: 1/4 away on August 18, 2016, 02:50:00 PM
Donovan, As per his website, he measures brace height from the string to the belly side of the grip throat.  Fred
Title: Re: Holm-Made River Runner brace height question
Post by: TxSportsman on August 18, 2016, 03:03:00 PM
Ahh thanks Fred, I looked there just didn't see it. Blind...
Title: Re: Holm-Made River Runner brace height question
Post by: 1/4 away on August 18, 2016, 07:10:00 PM
No problem. Click on the Bows tab at the top of the page then go down and click on the River Runner description. It'll change info to show you the brace heights recommended.
Title: Re: Holm-Made River Runner brace height question
Post by: johnnyk71 on August 18, 2016, 08:38:00 PM
next bow i get will probably be one of those. really dig them.
Title: Re: Holm-Made River Runner brace height question
Post by: PICKNGRIN on August 18, 2016, 10:00:00 PM
I have 3 of them.  I like them around 7 1/2"
Title: Re: Holm-Made River Runner brace height question
Post by: jt85 on August 18, 2016, 10:05:00 PM
7 1/2 is where I set mine
Title: Re: Holm-Made River Runner brace height question
Post by: TxSportsman on August 18, 2016, 10:13:00 PM
7 5/8" and liking it. Need to fine tune a bit now. Thanks
Title: Re: Holm-Made River Runner brace height question
Post by: ron w on August 19, 2016, 04:19:00 PM
I have 4 of them......your on the right track.
Text only | Text with Images