I need some 50 Grain brass inserts for my g/t blems. I can't seem to find anything but 100 grain in brass. I am currently using the aluminum inserts. I don't wanna have to retune so I want to keep using 50 grains. Anybody know where to get some?
Randy, I looked at their website and it looks like they make a 60 gr brass insert. We should've looked at it when you were here earlier. It says that the shop just down the road from me is a dealer. You may want to call On Target in Canton. It also says they are a dealer - maybe they have them in stock.
I bet the extra 10 gr won't make much difference.
https://goldtip.com/componentdetail.aspx?page=inserts&cid=130
Black eagle makes a 40 grain brass insert.. Ordered some am's they're nice
Same guy that sells the blems...BIG Jim!
Here ya go! Any 5/16 brass insert will fit.
http://www.3riversarchery.com/brass-arrow-point-inserts.html
Bisch
Thx guys, I'll look into it some more.
Big Jim only has aluminum in 50 grain from what I see on the website.
You are still nowhere...those 60 grain inserts fit the Lasers which are crossbow bolts...and you still do not know where to find 5/16 50 grain brass inserts, only that they should fit...I would use the 100 grain inserts (which I actually do with my 75/90's) and drop my point weight by 50 grains
DDave
Hmmmm.... I didn't realize the 5/16 would fit!?!
Is That .3125 o/d?? The blems are .246 id
I also prefer to keep using my 150 grn German kinetics
Sorry, didn't realize those 60's were for "other". Maybe just cut the 100's down with a Drexel or similar.
Sorry, didn't realize those 60's were for "other". Maybe just cut the 100's down with a Drexel or similar.
ID of gold tip traditional is .246
Yes sir, that's why I questioned the 5/16 which is .3125 od. I can't believe I can't find a simple 50 grain brass insert that fits a gt blem.
Randy, I shoot GT 3555 blems from Big Jim and get my brass inserts fron 3 rivers. I happen to have a dozen 50 grain inserts you are welcome to, just pm me your mailing address. Fred
I get my 50gr brass inserts from BigJim. They may not be gt but they fit. Call him and ask jim and ask him.
These right here..
http://www.shop.bigjimsbowcompany.com/Brass-Point-Inserts-3RBrassInserts.htm
Think I got it figured out. thx to all of you for the help and the offers! Great people here as always!!
QuoteOriginally posted by crittergetter:
Hmmmm.... I didn't realize the 5/16 would fit!?!
Is That .3125 o/d?? The blems are .246 id
I also prefer to keep using my 150 grn German kinetics
I also prefer to keep using my 150 grn German kinetics Or you could justswitch things up and then pkg up MY broadheads and send to me right away! :thumbsup: :thumbsup: :thumbsup:
Bisch
Yep, 5/16 will work if they are for Easton or GT
Bisch, the only way you'll ever talk me outta those heads is...
Well, second thought... You won't!! Lol!
RMS Gear has 100 and 50 grain inserts that will work. Who can tell me where to get those pesky 75 grain inserts?
QuoteOriginally posted by Longtoke:
RMS Gear has 100 and 50 grain inserts that will work. Who can tell me where to get those pesky 75 grain inserts?
Unless you use HIT inserts, the only way I know of is to get 100gr inserts and a grain scale. The trim the 100gr down to 75gr.
Bisch
The Footed Shaft has them. They are a sponsor here.