Hi all,
Received my new Bear Super Kodiak in Black Phenolic last week after 14 months wait. Spec is 60" RH 55#. Have only had 2 sessions with it so far and have been very careful with it.
I've started to notice cracks appearing in the riser and I'm not sure if I should be concerned. These are fairly fine white cracks and are not threatening the limb joint yet. They're not opening up at all but I can detect them if I run my nail across.
Bit annoying but I can live with them if they're just cosmetic. Do you think it could be just the lacquer layer cracking or is it the phenolic material itself? Can anything be done to make them disappear?
Also horizontal cracks on limbs but I think those are quite common on bear bows.
Thanks (http://i1284.photobucket.com/albums/a565/sutts2/IMAG1871a_zpswfs4kl8c.jpg)
(http://i1284.photobucket.com/albums/a565/sutts2/IMAG1870a_zps6ikvzce4.jpg)
http://i1284.photobucket.com/albums/a565/sutts2/IMAG1870a_zps6ikvzce4.jpg
http://i1284.photobucket.com/albums/a565/sutts2/IMAG1869a_zpsdpdy4yaz.jpg
http://i1284.photobucket.com/albums/a565/sutts2/IMAG1874a_zps6tkxl446.jpg
I would call them and send them that photo!
Is this a new bow or just new to you? If new I wouldn't be happy, if it's an original I would say it's in pretty good shape for its age and most likely its just in the finish. I have never seen phenolic crack like that.
If that is a new bow I would be very unhappy. Those cracks in limbs will only get worst. I sent back a set of limbs and got a new pair which did not crack
From your post it sounds like a new bow. I would give them a call immediately and address the cracks.
Have the cracks continued to get bigger as you shoot the bow?
It's a brand new bow but I've been waiting over a year for it. It looked faultless out of the box. My pictures aren't great - the lines on the side of the grip are reflections of brick work. The cracks I'm talking about are the white ones on the inside of the grip area.
I've probably only taken 150 shots with it so far and yes, more fine cracks have appeared after my first session but they aren't widening really.
Hate to send it back after waiting this long though.
I feel your pain on waiting for it, but they aren't gonna heal themselves. On a brand new bow, personally I would be contacting Bear on it!
I would call Bear and arrange to send them some pic's. I don't believe this should be happening after 150 shots. I would also let them know however they handle this, that you're not interested in another 14 month wait. Good luck. Keep us updated please.
I had some fine cracks in my patriot limbs smaller than that. Four months later had a new ausable in my hands. The people at best should def take care of that.
Looks like the either the finish is crazing, or the phenolic shriinking a bit. I have a bow made with phenolic that is doing the same thing. No way would I just accept it on a new bow. Call them right away and send pics off asap imo.
Not good. That is shrinkage and since phenolic is a cooked product made under extreme heat it is defective. I have never had a piece of phenolic do that and have build a lot of bows with phenolic. Those cracks are not finish and will only get worse with time.
Good thing is Bear is a reputable company and will probably not hesitate to replace it.
God bless, Steve
Thanks for your comments everyone. I'll send Bear some better pictures and see what they say. I used to think the phenolic riser was machined from a big solid chunk but now I'm thinking it's probably a laminate and the white in the cracks is the glue showing through where the layers are separating a little. Tempted to just go for the all wood Super Kodiak Greyling Green if I get a choice - unless anyone knows of any problems with that model? Should shoot just the same right?
Appreciate the help.
Dave
Pm sent
I,ve seen paper phenolic crack many times. Linen works much better . I don't think I've seen paper phenolic that didn't crack they are surface checks and are easy to fix , my supplier and I had a conversation about this a couple of years ago best not to put it in a bow...
I bought one new in May 2015, it developed horizontal cracks in the finish at the fade outs of both limbs, visible under good light, but couldn't feel them, but there must have been 30 or more. Again, they were very light. Sent it back to Bear and they replaced the bow. Hope this one doesn't do the same thing. Probably wasn't hurting the bow, but it bothered me just the same.
Thanks sidekick, good to know I'm not the only one.
I would send it back and ask for a replacement.
Sorry you're going to have to send it all the way back the FL from the UK. I hope Bear does well by you. I think they will.
No way would I accept that. I have had issues before with the lines across the limbs (new purchase by me) and Bear replaced the bow without any problem. The horizontal cracks are in the finish, but the newer finish they are using is not supposed to do that. So far my 2015 SK and TD have neither one done that.
Any update?
A friend of mine bow is doing the same thing
that is some sorry phenolic.
I think it is paper phenolic. I have had cracks develop in two different paper phenolic risers. Never had an issue with linen.