just acquired a Bear minuteman recurve
what I would like to know
is there a specific limb that goes on the bottom of the riser
can you shoot this bow of the rise.... at the present there is a stick on flipper rest
the bow is 66" and 35 pound draw weight
would a Easton x7 1914 be ok for it
and last where can I have a string made for this bow
thanks
anybody
HELP :help:
I had one, nice little bow. As far as the limbs go, I just assembled mine so that the lettering was right side up when holding the bow in shooting position. They can be shot off of the shelf, if the shelf is flat. Mine was, and I think they're all that way.
Any string maker on here can make a string for you, check the sponsors list.
Can't help with the arrows, sorry.
Good luck!
GREAT THANKS
will shoot it of the shelf
If the bow is 35lb at 28" and is your draw length the 1914 will be too stiff. I bet 1816 with a 100gr or 125gr point would work a lot better and maybe a 1716. Good luck.
thank you
my draw length is 29