Trad Gang
Main Boards => PowWow => Topic started by: Tee Bone on January 19, 2016, 07:03:00 AM
-
Just finished up our 3rd year and am thankful for all the support from Trad Gangers. This truly is a great place.
I am overstocked on left wing Badgers so in an attempt to equal out the inventory I am having a sell on left wing only. $38 per pack shipping to the lower 48 included. The only way to get this is to call Jennifer at 706-781-2888. Thanks again.
-
I have a hard time tearing one up. Put just a slight tanto on the tip(don't like large tanto tips) and dang amighty these things are tuff!
:thumbsup:
-
The A-10 Warthog of all broadheads.
-
My 1st Experience with them...
From the Bottom Up... (http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=132274#000000)
-
Now here's a head I have yet to 'fold up' or destroy!!!
:thumbsup:
-
Have an issue with your website fully loading for the past 4 hours.
-
kings....must be issue on your end as I just downloaded every page of their website at about 1.5 seconds per page on my phone
-
Both home and office PC had same issue. :thumbsup:
-
Sorry about the website issues, I know it is undergoing some changes over the next few days so hopefully it will get straitened out.
-
I think they are a tough beoadhead but i made the mistake tonight of shooting one into a firm broadhead Yellow Jacket target. Went to pull it out, gave a firm but normal pull and pop the factory insert popped right out. I was suprised how little glue was on it. Not i have to loose a good beoadhead or cut up a good target to get it back. Bummer
-
Yep, great heads. Always have a few in my quiver. Big Plus that I can get them in NZ as well.
-
(http://i172.photobucket.com/albums/w39/rcswampbucket/IMG_0772_zps6dff0b39.jpg) (http://s172.photobucket.com/user/rcswampbucket/media/IMG_0772_zps6dff0b39.jpg.html)
-
(http://i172.photobucket.com/albums/w39/rcswampbucket/IMG_0758_zpsc3b35e91.jpg) (http://s172.photobucket.com/user/rcswampbucket/media/IMG_0758_zpsc3b35e91.jpg.html)
-
(http://i172.photobucket.com/albums/w39/rcswampbucket/IMG_0723_zpsdf92a27c.jpg) (http://s172.photobucket.com/user/rcswampbucket/media/IMG_0723_zpsdf92a27c.jpg.html)
-
(http://i172.photobucket.com/albums/w39/rcswampbucket/IMG_0718_zps47de42b4.jpg) (http://s172.photobucket.com/user/rcswampbucket/media/IMG_0718_zps47de42b4.jpg.html)
-
(http://i172.photobucket.com/albums/w39/rcswampbucket/IMG_0529_zps0fe331fb.jpg) (http://s172.photobucket.com/user/rcswampbucket/media/IMG_0529_zps0fe331fb.jpg.html)
-
(http://i172.photobucket.com/albums/w39/rcswampbucket/IMG_0433_zpsce1640dd.jpg) (http://s172.photobucket.com/user/rcswampbucket/media/IMG_0433_zpsce1640dd.jpg.html)
-
(http://i172.photobucket.com/albums/w39/rcswampbucket/IMG_0420_zps084bbef6.jpg) (http://s172.photobucket.com/user/rcswampbucket/media/IMG_0420_zps084bbef6.jpg.html)
-
Mr jack Hoyt,
I don't know if it would work with the yellow jacket sense its so thick...
But what my mind could come up with on the spot when I had a head pop off may help!!!
If you know where the hole is, then put your shaft into the the hole, push the shaft to the point, and push the point out of the back of the target.
But it may not work with a yellow jacket, those things are pretty thick and tough.
-
RC, you are a killer!!!!! :thumbsup: :thumbsup: :thumbsup:
Bisch
-
Wish I could try them but illegal in Oregon.
-
I went to the web site, but couldn't find any info on a warranty. Is there any?
-
I have never published a warranty anywhere but encourage anyone with a problem to please call and I will make it right. I am just a bowhunter trying to turn a passion into a small business. Sure not looking to rip anybody off or make any enemies. If anyone has a problem please call.
Stephan Patton 706-781-4019
-
Tee Bone,
Thank You for replying. "please call and I will make it right." That is all anyone can ask for.
and: Nice looking Heads!