Trad Gang

Main Boards => PowWow => Topic started by: Arrowcraft on January 09, 2016, 10:00:00 AM

Title: split finger
Post by: Arrowcraft on January 09, 2016, 10:00:00 AM
I had bow built , with limbs tiller for split finger , can new limbs be made for 3 under style shooting ?
Title: Re: split finger
Post by: Kelly on January 09, 2016, 10:02:00 AM
Most likely but just go ahead and shoot it any way you decide. Really not that much difference.
Title: Re: split finger
Post by: Alexander Traditional on January 09, 2016, 10:04:00 AM
QuoteOriginally posted by Kelly:
Most likely but just go ahead and shoot it any way you decide. Really not that much difference.
I was told this by a bowyer that I believe.
Title: Re: split finger
Post by: ISP 5353 on January 09, 2016, 10:50:00 AM
Raise the nock a little and give it a try.  I bet it will shoot just fine.  Good luck!
Title: Re: split finger
Post by: Mr. fingers on January 09, 2016, 04:25:00 PM
When I ordered my big Jim buffalo in the process of ordering I told Jim I shoot,split but I was thinking of changing back to 3 under. I couldn't decide. He told me if your shooting split now get it tillered for split if you decide to go to 3 under you can it's really no big deal just raise,you nock point.
Title: Re: split finger
Post by: MnFn on January 09, 2016, 05:16:00 PM
I have bows tillered both ways but  shoot split and can't tell the difference.
Title: Re: split finger
Post by: D. Key on January 09, 2016, 10:12:00 PM
Raise your nock. The only thing noticeable is a bit more noise at the shot.
Title: Re: split finger
Post by: on January 10, 2016, 10:07:00 PM
What everybody else said^^^^^^^. There is no need to get new limbs.

Bisch
Title: Re: split finger
Post by: BWallace10327 on January 12, 2016, 01:33:00 PM
Would shooting a bow that is tillered 3-under require a lower nock point to obtain good arrow flight, if that bow was shot split finger?