INFO: Trad Archery for Bowhunters



Author Topic: If you want fancy, don't look here.....Arrow Build Along (Update PG6)  (Read 22047 times)

Offline magnus

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3550
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #60 on: January 23, 2011, 08:15:00 AM »
One thing I do is weigh them one time before I put nocks on and any shafts that are out of the weight range get another coat of sealer. A quick and easy way to get your shafts closer to the same weight.

TW what did you use to force dry the shafts just a fan?
Keeping the Faith!
Matt
TGMM Family of the bow
 Turkey Flite Traditional  
[email protected]

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #61 on: January 23, 2011, 11:39:00 AM »
Bud B, I will weigh the shafts again upon completion of the arrows and post results. Do you want the total with or with out the tips on?

Magnus, I thought about another coat on the lighter ones to bring them a little closer to the others but, I was still in the 10gr range so, I opted not to. I turned the heat up in my shop room and put a little blower fan I have to help speed up drying time. First time I tried that and it worked pretty good.
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline magnus

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3550
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #62 on: January 23, 2011, 11:53:00 AM »
TW. Good tip! Yeah 10 grains is ideal. I was just referring to shafts at 20 or more. Can't wait to see them finished.

Matt
Keeping the Faith!
Matt
TGMM Family of the bow
 Turkey Flite Traditional  
[email protected]

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #63 on: January 23, 2011, 01:57:00 PM »
To keep the post moving, I decided to go ahead and make up our test shaft. Since it will be just that, I didn't care if the fletching was going to be a different color than the rest. I set up my J-8 fletcher and using Fletch Tite Platnum (it adheres real well to the urethane) I begin the fletching process. Ensuring that my nock is in the correct position I do the cock feather first. Usually this is where it would be a different color if you like that.
   

Then comes the first hen feather:
   

And now the second hen feather:
   
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #64 on: January 23, 2011, 02:02:00 PM »
Once my feathers are attached, I put a little drop of glue at the tip and end of each feather so that they don't get snagged when passing the shelf, going through targets etc.
 
 

If done correctly and with the correct clamp, you get a nice helical fletch. By the way, these are 5", left wing sheild cut feathers.
 
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #65 on: January 23, 2011, 02:15:00 PM »
As you can tell, this is a "Plain Jane" arrow. As one gets better, you can get as fancy as you like. But, for a practice/hunting shaft with no frills, this will work just fine.   :thumbsup:
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline Ron+dog

  • Trad Bowhunter
  • **
  • Posts: 294
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #66 on: January 23, 2011, 02:24:00 PM »
looks good TW
you know more then you let on gonna have to change that screen name from wannabe1 to are1
  :thumbsup:    :campfire:
>>>--------> <--------<<<
" the happiness that is found sleeping under tents is unbelievable. one night in tents is worth three in town" -bruce chatwin in far journeys

Offline J. Holden

  • Trad Bowhunter
  • **
  • Posts: 1472
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #67 on: January 23, 2011, 02:50:00 PM »
So you used a right wing fletcher with left wing feathers.  My question is does the feather take on a right twist?  I have some lefties but my fletcher is a righty.  Thanks for letting me know.

-Jeremy  :coffee:
Pslam 46:10

"A real man rejects passivity and takes responsibility to lead, provide, protect, and teach expecting to receive the greater reward." Dr. Robert Lewis

Offline mmisciag

  • Trad Bowhunter
  • **
  • Posts: 552
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #68 on: January 23, 2011, 02:57:00 PM »
I think it was a left wing clamp. The word "right" was used to mean correct.

If done right and with the "çorrect" clamp, you get a nice helical fletch.

At least that is how I took it.

Martin
***************************************************************

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #69 on: January 23, 2011, 03:21:00 PM »
Jeremy, Martin is correct. Sorry for my wording, I have corrected my statement so there is no confusion.    :D

 
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline SpankyNeal

  • Trad Bowhunter
  • **
  • Posts: 1264
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #70 on: January 23, 2011, 03:29:00 PM »
Looks great TW...well done!

Spanky
Ken "Spanky" Neal

4 Sunset Hills and counting!

66" 59# "White Dragon"
65" 56# "El Tigre"
67" 47# "Quiet Places"
66" 57# "Lionheart"

"Speed is vital, however it is absolutely worthless when you exchange it for stability and accuracy"...John Schulz

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #71 on: January 23, 2011, 03:33:00 PM »
Ok, here's where things can get tricky. You will find your own method as you delve into your project. I use a "Cut Off Saw" from Harbor Freight to cut my shafts. It works on wood, aluminum and carbon. I cut my shaft so that my 145gr field tip is 30.5" back of point. This is my starting point to get good flight. I will trim down after shooting depending on how it flies. Right now, arrow is 590gr total.
 
 
 
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #72 on: January 23, 2011, 03:56:00 PM »
Ok, here's the arrow shot out of my 68", 51# @ 29" Tembo. Shot is approximately 10yds. It flew pretty good but, I think I can come down a 1/2" on length. Any thoughts out there? "Click The Photo"
   
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline SpankyNeal

  • Trad Bowhunter
  • **
  • Posts: 1264
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #73 on: January 23, 2011, 04:01:00 PM »
I can't tell much from the shot, but I like to take it 1/4" at a time...that's just me. Maybe back up some if you can and see what it does.
Ken "Spanky" Neal

4 Sunset Hills and counting!

66" 59# "White Dragon"
65" 56# "El Tigre"
67" 47# "Quiet Places"
66" 57# "Lionheart"

"Speed is vital, however it is absolutely worthless when you exchange it for stability and accuracy"...John Schulz

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #74 on: January 23, 2011, 04:11:00 PM »
Roger that, I'll go back to about 15yds.   :thumbsup:
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #75 on: January 23, 2011, 05:06:00 PM »
Ok, I backed out to about 15yds and arrow still seemed weak. I did the 1/4" thing and still ended up coming down to 30" b.o.p. Arrow really straightened up in flight at this length. I shot it a few times to make sure at approx. 18yds. That's the max for my back yard. It flew great so, I glued the head on and shot 10 times. It was hitting almost dead center every shot. Arrow came out at 582gr. Don't mind the sound before the arrow hits. It's not my bow but, my 4yr old son hitting the table on our back porch.     :D    Click Photo.

   
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #76 on: January 23, 2011, 05:24:00 PM »
I apologize for the poor video but, was trying to show just how straight these shafts come if you use Douglas Fir. I did not have to straighten one shaft out of the whole dozen.
   

Our finished arrow at 30" b.o.p. 145grn field tip and 582 grains total.

 
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline Wannabe1

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 6807
  • TGMM Family of the Bow
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #77 on: January 23, 2011, 06:03:00 PM »
Hello, anybody out there?   :)

In case anyone's interested, I shot the same arrow out of my 68", 51# @ 29" HH Owl and got great flight also.   :D  I believe these will work.
Desert Shield/Storm, Somalia and IOF Veteran
"The Mountains are calling and, I must go!" John Muir

Offline magnus

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3550
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #78 on: January 23, 2011, 06:22:00 PM »
Oh yeah Gotta love those surewoods! They are deffinetly my favorite shaft. I will use others for small game and stumping but they are my only deer shaft! I just wish I live close by to them too! Lol.
  On your video. It might be my phone but that was the clearest video I've seen on that site! Thanks
Keeping the Faith!
Matt
TGMM Family of the bow
 Turkey Flite Traditional  
[email protected]

Offline SpankyNeal

  • Trad Bowhunter
  • **
  • Posts: 1264
Re: If you want fancy, don't look here.....Arrow Build Along (Update PG6)
« Reply #79 on: January 23, 2011, 07:41:00 PM »
Yep, now that shot did look perfect! Congrats I think you've got her dialed in...you'll know for sure when you mount the BH's!

Great job!

Spanky
Ken "Spanky" Neal

4 Sunset Hills and counting!

66" 59# "White Dragon"
65" 56# "El Tigre"
67" 47# "Quiet Places"
66" 57# "Lionheart"

"Speed is vital, however it is absolutely worthless when you exchange it for stability and accuracy"...John Schulz

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©