Main Boards > The Bowyer's Bench

Dulling Bow Finish

(1/4) > >>

What grit of steel wool or ? can I use to dull the finish on a Bear TD riser that is gloss now.
Thanks in advance!

Crooked Stic:
Try 0000 steel wool.


--- Quote from: Crooked Stic on November 14, 2023, 02:14:40 PM ---Try 0000 steel wool.

--- End quote ---

2X    :thumbsup:

Pat B:
A quick spray of satin poly will also.

Steel wool is pretty aggressive on a finish. Before trying that I would see if one of the more aggressive grades of scotchbrite pad will get you to the finish you want. You can always go more aggressive if you need to, but it's a lot more work to go back once you've went too far.



[0] Message Index

[#] Next page

Go to full version